Dana May 21, 2012 for Model Number MDBH955AWS My Maytag 300 quiet series won't start then though some of the lights we light up. I had a service man out he said it was the control board. I order one myself replaced it still didn't work while trying to see what else could be wrong I broke the latch assembly ordered a new one and after a few tapping on the front of the washer it has worked for a few weeks, now it is doing the same thing I called the repair guy out for some of the lights light up but will not start from what I see here I need a new control pad? I have already spent 260.00 on the parts and repair guy.
1 Answer Hello Dana. Based on the information you provided, the control panel 6-920244 is bad and will need to be replaced on the unit. Read More...
Stephanie December 02, 2011 for Model Number MDBH955AWS When I press any wash button it keeps going back to rinse. I got it to start washing and then part way through it stopped and the rinse light was on. No matter what button I push ( besides start ) it will go to rinse. It will work in the rinse cycle but I cant get it to wash. Do you think I only need to replace the control panel?
1 Answer Hello Stephanie. Based on the information you provided, it sounds like the control panel 6-920244 should repair the issue your having with the unit. Hope this helps. Read More...
Rich November 09, 2011 for Model Number mdbh955aws The delay 2,4,6 lights keep flashing one at a time then all the lights go off dishwasher won't run at all. Is it the control panel?
1 Answer Hi Rich. The tech. sheet is located inside the kick panel. This will help diagnose the codes you mention. If it is giving specific codes as the wash light blinking or such. You will do yourself a big favor by removing the lower wash arm and taking the top filter off. Going into it from the top down and cleaning as you go. Inspecting the parts (chopper blade). Use dishwasher magic part # TJ104 monthly to keep clean . Use a pick tool to remove debris from the wash arm as you flush it out under the sink. Inspect the pump and the drain hose end/and sinkend to insure they are not clogged. Start there and if we can assist further, let us know. Thank You. Read More...
Joe October 14, 2011 for Model Number mdbh955awb The lights on my dishwasher stopped working (all at once). The dishwasher still runs when I push start, but will not stop when I hit the cancel button. I also opened it up during the cylce and the water was cold. I have had the dishwasher for about 4 years and have not had any problems until now.
1 Answer Hi Joe. You need the control panel assy. part # 6-920244. Check the incomming water to the tub (or sink) to make sure it is at least 120° while you are loading the dishwasher. Thank You. Read More...
Richard October 07, 2011 for Model Number MDBH955AWS My dishwasher wont start. All the lights on the control panel light up except for the normal wash cycle button. And when I try to perform a heavy wash cycle the machine still will not start. It looks like a control panel issue with the normal cycle button and the start button having gone kaputz on me. Do you think its a control panel issue or the circuit board. BTW does the control panal come with the ribbon cable? Thanks in advance for your help.
1 Answer Hello Richard. Yes, the control panel 6-920244 does come with the ribbon cable, and does sound like the probelm with your unit, based on the information you provided. Hope this helps. Read More...
Jeff W August 07, 2011 for Model Number MDBH955AWS Question.....My dishwasher won't start. I can push on the touch panel and only the "heavy wash" light will light up and the "normal wash" light will light up. Nothing else will light up, no auto wash light nor the start light. I have been looking at the parts list and I'm not sure which part/s I will need to make the dishwasher work. Can you tell me which part I will need?
1 Answer Jeff, The more likely situation is a keypad assembly issue 6-920244 not the control board. You can test the keypad operation with a multimeter and the Technical Data sheet, attached to the backside of the lower kickplate panel. Good Luck. Read More...
Roy G. July 21, 2011 for Model Number mdbh955awq Dishwasher starts by filling. after about 60 secs pump starts then power to fill valve shuts off before enough water. fill is not being shut off by float switch. signal to turn off fill valve seems to come from control panel as soon as pump starts. defective control panel?
1 Answer Roy, Very good deduction, Yes, you most likely have a bad touchpanel keypad 6-920244. Remember when you replace the panel, put a thin coat of di electric grease, or vaseline around the ribbon/board connector on the control board, so we don't get debris and moisture inside the contacts. Thanks and Good Luck. Read More...
1 Answer Hello Don. You will need to disconnect the power going to the unit. Then remove the screws holding in the inner door panel. Remove the inner door panel, and remove the ribbon cable from the control board. Then remove the screws holding the control panel in place. Reinstall in reverse order. Hope this helps. Thanks! Read More...