Mary January 28, 2016 for Model Number Mo85600aww Is it possible for me to replace the door panel myself? Part 99003531
1 Answer Mary, The control panel is removed by taking the screws out of the inner door panel and lift the inner door panel. Once you get the door panel lifted up remove the 4 screws that are holding the control panel in place and remove the panel and install the new one. Transfer all parts to the new one. Read More...
Lina October 04, 2015 for Model Number MDB6601AWQ Only one cycle NORMAL is responding; all others-unresponsive.
1 Answer Hello Lina. The part your needing 6-919822 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Read More...
Michael September 16, 2015 for Model Number 911.47644100 Looking for the control panel for this double oven in a bisque color. One of your indicates black, other one I cannot find the color in the description.
1 Answer Micheal, The part number for the bisque control panel is WB36T10484 but unfortunately has been discontinued by the manufacturer with no suitable replacement available other than the black and white one. The white control is part number WB36T10483 and black is WB36T10485. Read More...
1 Answer Hello John. Based on the information you provided, make sure the door switches are good and if so, you will need to order and replace the control panel on the unit. Read More...
Charlie April 26, 2015 for Model Number mdbh955aws Dishwasher still runs but some things do not work. Can select all washes except light wash. Start/cancel works. Auto clean works. None of the options buttons show lights. The lock seems to work, but no indicator light. Delay 2-4-6 does not work at all. What do you think? Been this way for a couple of weeks. Thank you,
1 Answer Charlie, You will want to open the door and remove the screws from the inner panel and check the ribbon harness of the control panel for corrosion. If these check ok then the control panel would need to be replaced. Read More...
Cory August 19, 2014 I have a maytag quiet series 300 and the sanitize and heated dry button do not work is that a control panel problem or is it a control board problem?
Jack D July 04, 2014 for Model Number MDBH968AWB3 No power to the control board. What can be the problem?
1 Answer Jack, If there is no power getting to the control board on the dishwasher then you will want to first check the breaker in the home. If the unit is plugged into the wall then look for a GFCI that is popped. You will also want to check the junction box at the bottom of the unit where the electric connects to the unit and look for a loose connections. Then check the wiring from the junction box up through the door and to the control board. If this checks ok and there is power at the control board then the control panel would be the issue of the unit not working. Read More...
Lisa May 13, 2014 for Model Number 6920309B quiet series 300 dishwasher Start button won't work. The delay and sanitize buttons will blink but it will not start. I have opened the control panel and there are no "obvious" defects. Is this likely a "ribbon" issue? Will I need to install a whole new keypad?
1 Answer Hello Lisa. Based on the information you provided, it sounds like the control panel is bad and will need to be replaced on the unit. Read More...
Francine September 17, 2013 I have a Maytag dishwasher Quiet series 300 the model number has worn off and I found a control panel which looks like my dishwasher control panel AP4364035 on appliance parts.com. Do you think this will work or can you give me any advice?
1 Answer Hello Francine. Sorry, We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Jim C August 03, 2013 for Model Number MDBH955AWW Replacing control panel, how do you release the ribbon to circuit board?
1 Answer Hello Jim. Press in on the locking tabs on the connector and lift of the locking tab. Then pull the ribbon cable from the connector. When you install the new ribbon cable, make sure you press the tabs down to lock the ribbon cable into place on the unit. Read More...