Barry July 06, 2014 for Model Number MDB4651AWB3 This is for a Maytag Quietseries 200, model MDB4651AWB3. When I shut the door I get no electric signals on the buttons on the front of the door. The only button that will turn on the panel is the "delay button". Once I press the delay button each of the other buttons turn on like normal. All of the other buttons work properly when you press them on or off except for the "start" button. Nothing happens when I press start. I open and close the door again, press all of the other buttons, and then press start and still I get nothing. Do I need to replace the control panel to fix this? Thank you!
1 Answer Hello Barry, This can be an issue with the control or a stuck button on the control panel. You can test the switch for the delay option by reading resistance from the J1 connector pins 10 to 7. This should read open if not pressed and when pressed it should read 10K ohms. If it reads correctly, replace the control board WPW10218834. If not, replace the control panel 6-919806. Read More...
Steve P. March 21, 2014 for Model Number MDBH950AWB My Maytag dishwasher (model# MDBH950AWB) has a bad control panel. I inadvertenly ordered part # 6-919806 - of course the actual replacement part # is 6-917726. Are these parts interchangeable? Thanks
1 Answer Steve, Unfortunately, No, they are not interchangeable. They are somewhat "identical" physically, but the keypad tracers and circuits are different. You really don't want to take a chance, and install the incorrect part. Read More...
Nate August 27, 2012 for Model Number MDB4651AWB My MDB4651AWB dishwasher suddenly wont display any lights to the front panel, and wont turn on. I have confirmed both door switches are functional with a multimeter. Is there any way to identify if the faulty component is the front panel, or the electronic control board?
1 Answer Hello Nate. Test for power to the control board. If it is there, you will need to replace the control panel 6-919806 on the unit. Read More...
Chris November 28, 2011 for Model Number 6-919806 My child pulled the front panel off which pulled the connection cable from the panel. Do I need to replace the entire panel or can I get it connected and working again.
1 Answer Hello Chris. Based on the information, you will need to replace the control panel 6-919806 if the ribbon cable broke. Hope this helps. Read More...
Vicky September 02, 2011 for Model Number MDB4651AWB2 Part of the lights work on touch pad. But when you push start it will not start. Can you help me with this. Thank you
1 Answer Hello Vicky. You will need to test and make sure the door switches are good. If so, and the unit will not start, it sounds like the control panel 6-919806 is bad and will need to be replaced. Hope this helps. Read More...
Kel July 25, 2011 for Model Number MDB4651AWS Hi, I tested the two door switches as you suggested. Without the actuator pressed, at a scale of Rx1, I read 0 ohms and when I press the acutator I get infinity. This is the case with both switches. That means they are still working, right? So only choice is to replace the control panel AP4364553? Thank you.
1 Answer Hello Kel. Yes, based on the information you provided, it sounds like the control panel 6-919806 is bad and will need to be replaced. Hope this helps. Read More...
Kel July 20, 2011 for Model Number MDB4651AWS First, the control panel options setting started responding, but you could select still select Heavy, Normal, Light Cycle and start the machine (with or without delay). Now, you can select Heavy, Normal, or Light, but when you press Start/Cancel the wash doesn't start. Is the control board the likely culprit?
2 Answers Hello Kel. Test the door switches WP99002751 and make sure they are good. If so, you will need to replace the control panel 6-919806. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Kel July 20, 2011 for Model Number MDB4651AWS First, the control panel options setting started responding, but you could select still select Heavy, Normal, Light Cycle and start the machine (with or without delay). Now, you can select Heavy, Normal, or Light, but when you press Start/Cancel the wash doesn't start. Is the control board the likely culprit?
2 Answers Kel, No, the control board is the last option, you need to start at the control panel / key pad assembly 6-919806. Occasionally, you can dismantle the control assembly, clean the insertion end of the touchpad ribbon with alcohol, and re insert it on the control board, and the dishwasher will work for a while. You may want to give it a try. Good Luck. Read More...
Bo May 25, 2011 for Model Number mbd4651aws My buttons light up but I cannot switch cycles or even start one. I believe that my Control Panel is bad, but not for sure. I have already had it replaced once! Wondering what might be causing this to go out for the SECOND time!
1 Answer Hello Bo! If the control panel is not sending signal to the control board, it will need to be replaced. Your part number is 6-919806. Thanks. Read More...
Bobby April 26, 2011 for Model Number MDB4651AWB3 Hello, I believe my control panel is out on the dishwasher. The cycle delay lights will come on after pressing those buttons. But non of the others seem to work. What are your thoughts? Is this the correct part or could it be another issue? Door switch or the actual control board? Regards, Bobby
1 Answer Hello Bobby. Make sure the ribbon cable going to the control board is clean and dry. If so, you may have a bad control panel 6-919806, thanks! Read More...