Fred B November 13, 2022 for Model Number DWU4910BAX I need a new lower rack as the one I have is getting rust spots on it at some of its wire connection points. Where can I get a new lower rack ?? Thanks
1 Answer Fred B., This part has been discontinued by the manufacturer & is no longer available. No alternate or substitute part has been recommended by the manufacturer. Read More...
Mo October 22, 2021 for Model Number DWU7400AAX I understand they do not make the replacement model for this lower rack. I'm getting a mixed message if the WP99002572 has a replacement model that works or is this the replacement model # that works?
1 Answer Mo, the discontinued lower rack WP99002572 would be the most recent revision that the manufacturer had provided. Read More...
Mike May 31, 2021 for Model Number DWU7400AAE Since lower rack 99002572 is out of stock, is there a different lower rack that can be substituted?
1 Answer Mike, Sorry for the inconvenience but this is not just out of stock it has been discontinued by the manufacturer & is no longer available. No alternate or substitute part has been recommended by the manufacturer. Read More...
John June 13, 2019 for Model Number MDB 9150 AWW I need to replace the lower dishrack. all the replacement for 99002572 come with only 6 wheels. The original has 8 wheels. the six wheel version falls off the side rails when pulled out over the open door. Where can I find the original 8 wheel version?
1 Answer John, the lower dishrack for your model is part number [W10139223]. It will have only the 6 wheels, as the manufacturer only has this available because it is an updated version of its 8 wheel predecessor. Read More...
Izzy May 30, 2018 for Model Number DWU7500AAX I need to replace the bottom dish rack. I am ordering a replacement part WP99002572. I understand that the rack comes with long replacement tines, but does it also come with the needed clips and sleeves to install them? Also does the rack come with the roller wheels? Thank you.
1 Answer Izzy, Yes the rack includes the rollers/wheels, but it does not come with the WPY912709 tine Clip tine clip(s) or the WPW10116789 Tine Sleeve(s). If the original clips and sleeves aren't available or if they're damaged you would want to order at least two(2) of each. All the parts needed are in stock and available at this time. Thanks, Read More...
Danek April 25, 2018 for Model Number DWU8750AAX I ordered the lower rack (WP99002572) for my dishwasher. It fits but has a different configuration than my current lower rack. The lower rack came with two sets of tines with no instruction as to how to install them. I went through all of the current version questions and answers without any of them hitting this version. Would you please let me know what parts I need to order to secure the two sets of tines and direct me to some instructions. I looked at the repair video for tine clip WPY912709 http://www.appliancepartspros.com/whirlpool-clip-adjustable-peg-wpy912709-ap6024250.html and the tines in this video do not match the tines that come with lower rack AP6014443 http://www.appliancepartspros.com/whirlpool-dishrack-wp99002572-ap6014443.html Thanks for your help! Danek
1 Answer Danek, There should be clips that hold the tines in place. The clips will hook to the bottom of the lower rack and the tines will clip into it. Read More...
Shenandoah Farmer January 02, 2018 for Model Number DWU4910/BAX I've replaced the bottom rack of my dishwasher, but the replacement adjustable tines are in poor condition. Can I purchase just the lower rack adjustable tines and tine clips?
1 Answer Shenandoah, Yes, you can purchase the tines and clips separately, the part numbers are : WPY912709 / Y912709 Tine Clip (2 required), WP99002138 / WP99002138 Bowl Tine (1 required) and 12002218 / 12002218 Bowl Tine (1 required). All parts are in stock and available at this time. Thanks, Read More...
Mrspolly October 30, 2017 for Model Number DWU7400BAX I was pleased to find this forum as I also bought a WP99002572 replacement bottom rack. The one I got came with wheels and 2 extra long tine pieces and no instructions on what to do with them. In reading all the comments I find that Whirlpool no longer makes the kind of adjustable tines that were on my original and that if you got the two long tines, they were included with the rack by mistake! What to do? Hubby and I played around with them and decided that they fit best in the right back corner, running from back to front alongside existing grid wires. We tied each in place with 3 small zip ties. Voila! This area is wide enough that I can now put luncheon sized plates there. Hope this helps.
1 Answer MrsPolly, Thanks for your update, but, the AP6014443 lower rack does include the adjustable tines, per the factory " Part Comes With Only New Tines In Some Cases Cust. Original Fold Down Tines Can Be Reused. If You Need Tine Clips These Are Sold Separately " . If you'd prefer to have the tine clips instead of the wire ties the part numbers are WPY912709 / WPY912709 Clip, and WPW10116789 / WPW10116789 Sleeve, you'd need two(2) of each. Thanks Again, Read More...
Lucy May 14, 2017 for Model Number DWU9920AAE I need to order a new bottom rack for my DW. I want to be sure I am ordering the correct item. Does it come with the wheels on it? Also, the times that flip down are broken and lost. Are there permanent tines on (4 sets) all around the removable cutlery basket? Or does it come with the ones that flip/turn? Many thanks...
1 Answer Lucy, The part number for the rack will be WP99002572 and appears to come with the folding tines. Read More...
Mrs. Hollon April 28, 2017 for Model Number DWU4910BAX I've replaced my lower dishwasher rack, which came with 2 sets of "adjustable tines" attached by clips. Several of THOSE tines have rusted and broken. The rack itself is in perfect condition. Can I order the 2 sets of adjustable tines w/o the rack or clips?