Devin April 19, 2024 for Model Number KUDS30IXWH8 There is a round cap on the rinse aid dispenser. My cap fell off and was damaged by the heater. I would like to get a new cap, but I don't need the whole dispenser assmbly, just the round cap Can you help?
1 Answer Devin, the rinse aid cap WPW10524920 would be used with the model number provided. Read More...
Patricia July 27, 2023 for Model Number KDTE104DSS0 The soap dispenser has stopped opening. Is the only fix to replace the dispenser assembly?
Will February 02, 2022 for Model Number KUDS35FXSS4 My KUDS35FXSS4 uses all the rinse aid in 1 cycle. I have the dial set on 1, the cap closes / tightens as expected. It doesn’t matter how much rinse aid I put in (I filled it up to the max a few times before I realized what was happening). Would the fix be a new dispenser? Also it’s worth mentioning that since this has been happening, I have noticed baby bottles are not completely clean after a cycle. A residue is left over in them. I’m assuming this is related, and a new dispenser would be the fix.
1 Answer Will, The issue of the rinse aid would be a dispenser issue: W11032769 link: https://www.appliancepartspros.com/whirlpool-dispenser-w11032769-ap6039090.html The cleaning issue could be related but I would check the cycle to see if the water is circulating as normal and draining completely. Read More...
Chuck November 29, 2021 for Model Number MDB6949SDHO Do I need to order a gasket when ordering rinse dispenser
Matt September 23, 2021 for Model Number MDB4949SDM0 Where do I get just the round cap for the drying liquid port opening?
1 Answer Matt, unfortunately, the manufacturer does not list the rinse aid cap as being available separately from the dispenser W11032769. Read More...
1 Answer John, The rinse aid cap is not available as a separate part and you would need to get the dispenser to get the cap. Read More...
Hutch March 20, 2020 for Model Number MDB8949SBB3 My dispenser does not look like the one in the photo and the size measured edge to edge is 8 1/2" X 3 3/4" which is slightly smaller than the one in the picture. Is this a new part for this machine or is the picture not a true representation? Thanks,
1 Answer Hutch, the W11032769 / W11032769 Dispenser, Assembly is the correct dispenser for the model number you supplied. The original dispenser has been replaced by the manufacturer with a "factory direct" replacement part. The approximate dimensions are 3 3/4 in. X 8 3/4 in. (+/- 1/8 in.). there may be a slight difference in size and appearance, but the part will fit and work in your dishwasher. Thanks, Read More...
Linda March 11, 2020 for Model Number WDT910SSYM1 Hello, I need to replace the Rinse Aid Cap for a Whirlpool Gold series model# WDT910SSYM1 dishwasher. Is this something you carry? I do not want to replace the entire dispenser.
1 Answer Linda, unfortunately, the manufacturer does not list the rinse aid cap separately from the dispenser assembly W11032769. Read More...
Ralph February 10, 2020 for Model Number MDB7749SBM3 My rinse dispenser will not accept any rinse solution. The slot window shows that the holding cavity is empty, yet when I pour in new solution it is not advancing to the holding tank. Would this indicate a clog of some kind?
1 Answer Hello Ralph, This does sound like some sort of clog. We would recommend replacing the dispenser assembly W11032769. Read More...
Janell August 18, 2019 for Model Number KUDS25SHBL1 I have a KitchenAid Superba dishwasher. I need a replacement dispenser knob. I think the replacement number is WP9743399.
1 Answer Hello Janell, the only way to get the replacement knob now is by ordering the dispenser assembly part number WPW10616003. Thanks! Read More...