Dianne E March 11, 2018 for Model Number Kitchenaid Surperba model KDS 17A Dishwasher Think I need a need door spring. Door is extremely heavy and must be held tightly or well open rapidly and heavily with much noise. I can not locate a door spring for this Model KDS -17A.
1 Answer Dianne, The part number for the door springs would be B101970 but have been discontinued with no suitable replacement. Read More...
1 Answer Hello Don. You will need to check and see if your spring or cable broke on your model. Read More...
Minnie October 06, 2015 for Model Number WU900 Does the kit for replacing springs on a dishwasher door come with one or two springs?
Johnny January 05, 2014 for Model Number wu 504 Both right & left springs are intact but door falls open. I need the part number for the third spring, and can i replace it myself?
1 Answer Hello Johnny, unfortunately the springs for your older model are no longer available. The part # for the springs were 12001228 prior to the manufacturer discontinuing them. The kit actually was made up of only two springs, but they were a heavier tension. Originally that 3rd spring was for when a customer installed a wooden panel, which made the door heavier, it was more of a counter balance spring. The door shouldn't be dropping like a rock even with only 2 springs. Have you looked real close to see if maybe something is wrong with one of the hinges? Those older models also had different locations to position the springs, have you given that a try? Read More...
Andy February 07, 2012 for Model Number WU104 series 01 My Maytag dishwasher has broken the right door spring found on the lower right side as you face the machine. The one on the left is intact and it looks like the one on the right. What is the part number I need and are they the same right or left?
1 Answer Hello Andy! You will use door spring kit part number Y901862. This is the same part number for left or right. If you have a panel insert (wood panel door) you will use door spring kit part number 901111. Thanks! Read More...
Dfb October 05, 2011 for Model Number MDB9000AWB My Maytag dishwasher has lost one of its 4 door springs. It appears to be 5-1/2 inches installed, the smaller of the two on each side of the door. It fits in a small metal angle bracket on one end and a plastic connector on the other. I need the metal bracket and the spring, but cannot identify them on a parts list. Can you help?
1 Answer Hi DFB. The spring part # is WP912652. The LT. Door hinge is part # 6-914561. The Rt. Hinge is part # 6-914562. The spring link is part # WP912653. Thank you. Read More...
Tom June 25, 2011 for Model Number WU202 Where is the spring located and how do I access it for a replacement?
1 Answer Hi Tom. The door springs are located hooked on the left and right sides of the lower tub frame. They are accessed by removing the lower kick panel. The door spring part # is 901111.Hope this helps. Thank-you Read More...