Stacey March 31, 2024 for Model Number WRF540CWHZ00 I just replaced my broken crisper drawer frame (WP67006185) with a new one purchased from Appliance Parts Pros. I had no trouble removing parts from old frame and installing them on the new frame. The problem is that the frame sags in the middle so that the drawers are very nearly touching the surface below, even with nothing in them. In fact the sagging in the middle is obvious even without drawers attached at all. Is this typical of this part or is the particular part I received defective?
1 Answer Stacey,This is the correct part for your model with no center support. Make sure the one you received is not cracked or broken. Read More...
Barbara July 03, 2022 for Model Number RRTG18PABW I need the crisper shelf for a Haier or a part that will fir into the fridge.
1 Answer Barbara, The manufacturer is not showing a crisper shelf for this model refrigerator. Read More...
A.S. October 07, 2021 for Model Number KRFC300ESS03 Hi, Do you sell the crisper slides (basically, the piece with the tab that you push to adjust the humidity in the draw for fruits vs. vegetables)? Thank you.
1 Answer A. S. The humidity control slide for this model will be part number WP67005864. Read More...
Goldgitt March 26, 2020 Are you able to send me the exact measurements of this refrigerator crisper frame- I would like the measurments for the outer frame as well as the glass insert, if possible. Thank you!
1 Answer GoldGitt, We do not have the exact measurements and the approximate dimensions will be 31 1/2" Width x 13 1/2" depth. Read More...
Jt March 31, 2018 Does this part fit Kitchenaid KFIS20XVMS8? I noticed that the part # is the same as the one I saw on the Kitchenaid website but the picture of the part is different. So I'm confused as to do I go by part # which is WP67006185 or picture? Thanks.
1 Answer Hello JT, we list part number WP67006185 as the correct crisper frame. Our part number is listed on our site and begins with AP, the manufacturer part number begins with WP and both these numbers reference the same part. Hope this helps! Read More...
Ed June 15, 2015 for Model Number kbl522kwms5 I have a broken crisper frame on my KichenAid Model kbl522kwms5. I put that model number in your part search engine and then found a crisper model ap4080641. However, when i used the Appliance Compatibility Tool, the tool said it was not compatibile. Please Help! Regards, ED
1 Answer Ed, The crisper frame for your unit would be part number WPW10568041 and the center rail if needed is WPW10671238. Read More...
Richard June 17, 2014 for Model Number JFC2089HPF The crisper drawer frame has broken at the front and the crisper drawers sag. Does the crisper drawer frame for this model come with the glass attached to it?
1 Answer Hello Richard! No, the crisper frame WP67006185 does not include the glass. If the glass is needed you'll also need to order part number WP67006655. Thanks! Read More...
Rissa March 02, 2014 for Model Number Jennair JCB2059GES Was given fridge as a gift. Crisper draws aren't gliding easily. There are no wheels attached to them or on the frame. Need to know what to do to fix them.
1 Answer Rissa, The best way to get the drawers to glide on the rails properly is to apply a thin coat of lubricant such as Vaseline to help the drawers slide easier. Read More...
Bruce October 13, 2013 for Model Number MFC2061HEB The decal on my crisper frame is peeling off. Can I buy just the decal or do I have to buy the entire unit?
1 Answer Bruce, you'll have to replace the assembly WP67006185. The manufacturer does not offer the decal separate. Thanks. Read More...
Jacques August 05, 2011 for Model Number Kenmore model No. 970-681020, serial LA41114554 Would Frame, Crisper Part Number: AP4080641 Made by Whirlpool fit my Kenmore refrigirator model number 970-681020?
1 Answer Hello Jacques! Please double check your model 970-681020, this is not showing as a valid model number in our systems or the manufactures information we have available. Thanks! Read More...