Mark A April 27, 2012 for Model Number Amana TSI 18A3W (mfg P1182106WW) I purchased a replacement gasket (AP4013369) for the refrigerator door. It is not clear to me how to install this. Do I need to undo all the hex nuts that are underneath the gasket or will that take the door apart? At first I thought it was held in with adhesive, then I thought I had to screw through it with those hex screws, but now I'm just not sure. Please get back to me. Thanks Mark
1 Answer Mark, Yes, you will need to "roll" the gasket back and remove all the 1/4 in. hex head screws. Just about everyone has thier own way of doing it. Just remeber to warm the gasket before installing it on the liner, soak it in the tub with hot water. or set it out in the sunshine,if possible. Also, the screws have to be tight, but not to the point where the liner and gasket are "rippled", lubricate the hinge side of the gasket and the front flange of the cabinet with a thin coat of "vaseline" and make sure the gasket is sealed against the flange, before you do the finall torque on the liner screws. Good Luck and Thanks Read More...
Mark April 25, 2012 for Model Number Amana TSI 18A3W (P1182106WW) Yesterday I ordered a replacement gasket for my Amana refrigerator after speaking to your sales people. They had directed me to the part (AP4013369). I was amazed when the part arrived today, but when I looked at it, it doesn't appear to be magnetic like the original one. I was told that this is not the original part but I just expected the replacement would have the magnetic strip. The reason I needed a replacement is I switched the hinges so the door opens the other way and noticed that the gasket had folded over at the bottom and was not forming a good seal (on the refrigerator door only. The freezer seems to be fine). The magnetic strip really seems to make a difference in forming a tight seal. Can you confirm that the gasket I received doesn't have a magnetic strip? Can you find out if there is a replacement gasket with the magnetic strip? Thanks, Mark
1 Answer Hello Mark! The refrigerator door gasket WP12550109Q is the correct manfuacturer replacement gasked used on your Amana Refrigerator model number TSI18A3W (Mfg # P1182106WW). This gasket is magnetic and the magnetic strip is enclosed in the gasket. Thanks! Read More...
Bob April 20, 2012 for Model Number Amana TSI18A3W - s/n 9402134107 Will Whirlpool refrigerator door gasket fit?
1 Answer Hello Bob! Yes, the refrigerator door gasket WP12550109Q will fit your Amana model/serial number provided. Thanks! Read More...
J March 13, 2012 for Model Number Amana TH18V2W Will the Whirlpool refrigerator door gasket part #12550109Q fit my Amana refrigerator, model #TH18V2W?
1 Answer Hello J! The refrigerator door gasket 12550109Q, our part number WP12550109Q, is the correct replacement door gasket used on your refrigerator door of model TH18V2W. Thanks! Read More...
Joe M. September 05, 2011 for Model Number Amara TX18VL IS AP4013369 the right part to replace the gasket on the refrigerator door for the Amara TX18VL? Thanks!
1 Answer Hello Joe. Yes, WP12550109Q is the correct gasket, based on the model number you provided. Hope this helps. Read More...
Richard J. July 27, 2011 for Model Number Amana TA18R2L I need to replace damaged refrig door gasket. The existing gasket, when you lift from the door to reveal the securing screws on the door shelf, there appears to be a 1/16 inch raised channel all around the shelf panel edge, and the gasket has a corresponding raised lip around the entire edge and appears would secure the gasket in place. In the catalog picture, I can not see the lip around the edge of the gasket. Can you verify for me that Whirlpool part # AP4013369 is the correct replacement gasket? If not, can you suggest the correct part number.
2 Answers Hello Richard! Yes, the refrigerator door gasket WP12550109Q is the correct gasket replacement used on your Amana Refrigerator model TA18R2L. Thanks! Read More...
Richard J. July 27, 2011 for Model Number Amana TA18R2L I need to replace damaged refrig door gasket. The existing gasket, when you lift from the door to reveal the securing screws on the door shelf, there appears to be a 1/16 inch raised channel all around the shelf panel edge, and the gasket has a corresponding raised lip around the entire edge and appears would secure the gasket in place. In the catalog picture, I can not see the lip around the edge of the gasket. Can you verify for me that Whirlpool part # AP4013369 is the correct replacement gasket? If not, can you suggest the correct part number.
2 Answers Hello Richard. Based on the model number you provided, WP12550109Q is the correct refrigerator door gasket. Hope this helps. Read More...
Reese April 03, 2011 for Model Number Amana TZ19R2W Need a new door gasket and think the Part Number: AP4013369 is the one I need but was wondering if you had measurments so I could verify it? Thank you, Reese.
1 Answer Hello Reese! Per the manufacture the refrigerator door gasket WP12550109Q should measure 39.860 X 28.316. Thanks! Read More...