Todd January 28, 2012 for Model Number GS475LEMS0 Hello, my original door has a piece of glass with metal trim pieces on the bottom, left and right. I am unable to attach the number 14 bottom trim piece to this outer door, also there is a piece of metal which looks like number 21 on the diagram that is sticking out, do I need this metal piece anymore if the bottom trim is not required? Advise me how to install this new part properly since this is different than the original.
1 Answer Hi Todd. The bottom and side trim screws do need to be used to help hold the outer door glass. The outer door panel will have standoff tabs on it to hold the glass assy. a little off the front so there is a slight gap in between the two. If there are tabs on the back of the glass , make sure these tabs do not contact one another making it too thick to align the screw holes for the trim screws. Thank You. Read More...
Greg January 04, 2012 for Model Number rf368lxps0 When the part AP4364674 come's in will this let the oven door stay in the down position when door is open? Right now the door won't stay down unless I'm holding it down. Also now that the oven doors are finally on, do I still need to get part # AP 2990447? Please advise thanks.
1 Answer Hello Greg. Yes, when the outer glass WPW10330077 and handle are installed, the door should stay open on it's own. Hope this helps. Read More...
Greg January 01, 2012 for Model Number rf368lxps0 Now that the hinges are on, this is the way I had to do it. I line the slots up with hinges and had to take a screwdriver and pull out the hinges from door on to the oven slots. It takes a lot to do it now that it is done. Once you open the door it's does not stay in the open or down position. I have to hold down for it to stay if not it will go up on it's own. Still I'm am happy with that. Maybe you can tell me what is the problem and can I use the oven without the outer glass it on. Order from Appliance parts. Thanks a lot.
1 Answer Hi Greg. The door hinge springs are included with the hinge. Door Hinge-Part Number: WP8053807. This hinge is for painted door only. For stainless steel door use WP8272822. This may be the issue of the door not opening and staying open. Did you place the hinge outer hooks properly in the frame ? Thank You. Read More...
Greg December 31, 2011 for Model Number rf368lxps0 Every time I attemp to unlock hinges to the oven door it's keep's snaping back before I get a chance to put install them on. The oven in oven door is inserted to the range the door pins or hinges is not connecting keeps poping out. Do I need a special machine to keep hinges open so they will connect?
1 Answer Hello Greg. No, you will need to flip down the locking clips on the hinge WP8053807 to hold it open until it is installed on the unit. Hope this helps. Read More...
Scott December 25, 2011 for Model Number GR399LXHS My oven is stainless and wanted to see if I could change it over to White? If so what parts would I need. Looks like the door skin, bottom drawer skin, and then the top piece. All stainless pieces look like they are just skins and could replace? Thank you
1 Answer Hi Scott. The top is only a black part. The Outer door stainless is part # WPW10330077. The door hinge is part # WP8272822. The lower storage drawer is part # WPW10237657. Thank You. Read More...
Shane November 24, 2011 for Model Number WHIRLPOOL WFE361LVD0 Universal Silver My model color is listed as Universal Silver . The Glass, Outer Door - Color: Stainless AP4364674 appears to be the only Color available but is Stainless. Am I missing something or is there no Universal Silver available and just go with the stainless?
1 Answer Hi Shane. The universal silver outer glass part # is WPW10330079. The left side trim is part # W10761018. The right side part # is W10761014. The bottom trim is part # WPW10067550. Thank You. Read More...
Sally G. October 05, 2011 for Model Number tes356ms I ordered part number (W10144884)Glass, Outer Door AP4364674 Per Factory This If Too Small Must Order Prt#w10144901 Assy 06/10kc The door is too small. Can you please give instructions how to install. The manf only has complete door now...please help.
1 Answer Hello Sally. Here are the instructions on how to remove and replace the door assembly. Hope this helps. 1. Open the door approximately half way and install a nail or screw into the hinge hangers on each side of the door. 2. Close the oven door as far as the nails or screws will allow. 3. Grasp the sides and lift the door until it stops, then rotate the door toward the floor, and pull it toward you. Don't use the handle to lift the door off. To reinstall new door W10409956, 1. Grasp the sides of the door with your fingers on the front of the door and your thumbs on the inside surface. 2. Rest the bottom of the hinge hanger on the bottom of the slot in the range. 3. Position the door with the hinge hanger slots almost parallel to the front frame. 4. Push up and in until the hinge hanger slots become fastened to the range, then lower the door, and rotate it slightly from the front to the back until the slots are fully fastened. The hinge hanger will be close to the bottom of the front frame slot. 5. Open the door about half way and remove the nails or screws. 6. Close the door. Read More...
Eric October 01, 2011 for Model Number D156B Will this fit on a jenn air D156B electric range? The one we have now has a black glass on the front door. We would like to change it to ss front on the the door. Will we need to order a different glass also. Basically I would like to know how to convert the front to a stainless steel front door.
1 Answer Hello Eric! The outer door glass listed on the model given has been discontinued and is no longer available. The manufacture does not seem to offer the parts in stainless. Sorry! Read More...