Customer Questions and Answers for Glass-Door (Stl) Panel Assembly by Whirlpool

Hello Sally. Here are the instructions on how to remove and replace the door assembly. Hope this helps. 1. Open the door approximately half way and install a nail or screw into the hinge hangers on each side of the door. 2. Close the oven door as far as the nails or screws will allow. 3. Grasp the sides and lift the door until it stops, then rotate the door toward the floor, and pull it toward you. Don't use the handle to lift the door off. To reinstall new door W10409956, 1. Grasp the sides of the door with your fingers on the front of the door and your thumbs on the inside surface. 2. Rest the bottom of the hinge hanger on the bottom of the slot in the range. 3. Position the door with the hinge hanger slots almost parallel to the front frame. 4. Push up and in until the hinge hanger slots become fastened to the range, then lower the door, and rotate it slightly from the front to the back until the slots are fully fastened. The hinge hanger will be close to the bottom of the front frame slot. 5. Open the door about half way and remove the nails or screws. 6. Close the door.