Customer Questions and Answers for Ice Maker Wiring Harness by Whirlpool

Hanna, It is very possible that the harness will be the issue and you can do a continuity test on each of the wires to ensure that this is the issue.

Hanna, We will need your model number to help you find the right parts for your unit. Please post another question with all your info included thank you.

Hello Cari, first, the freezer temp needs to be below 10 deg for the ice maker to run, also check the door switches are being pressed in when the door is closed. The original wire harness can be reused unless the inline thermal fuse has opened, it can be checked with a multimeter for continuity.

Devra, On your model the manufacturer does not list the harness separately it comes with the ice maker assembly. W11729596 This is not to say the harness you listed won't work, as it may or may not it is just not listed for your model#.

Hello Evelyn, the ice maker wire harness has one end that plugs into the ice maker, the other end plugs into the rear freezer wall ice maker receptacle.

Hello Bruce, unfortunately, we do not have any service/tech information on this model to assist you. Suggest you contact the manufacturer for their advice for your question.

Toby, Thanks for the question!!! This is not the correct ice maker for your model. You would need D7824706Q There are notes on the part page for the correct harness and accessories that you may need.

Randall, Check to be sure you have the correct ice maker for your model. The manufacture's part list shows it should be our part number WPW10190965 and the manufacturer's number WPW10190965

Mikey, The ground wire will attach to the drain trough in the back at the top behind the evaporator.

James, The correct harness for this icemaker will be WP61001882.