George June 24, 2017 Is there any way to reduce the size of the cubes by any other way than turning the adjustment wheel on the side of the ice maker.? Does not reduce the size of the cubes. Everything else works fine.
1 Answer George, The only way to reduce the size of the cubes would be to turn the water supply valve off a little to lower the water pressure. Read More...
Paul May 25, 2017 for Model Number GI6FDRXXY09 W10882923 Is this the correct ice maker part # for my whirlpool fridge.. or is w10377151.. it works when ever it wants to.. pretty sure the ice maker needs replaced.. thanks
1 Answer Paul, The original part number for the icemaker was w10377151 and they substituted it to part number W10882923. Read More...
Bill February 21, 2017 for Model Number KitchenAid KFIS525XVMS9 My ice maker has an on/off switch on it. Will this part work? I don't see a switch on it.
1 Answer Hello Bill. Yes, according to the manufacturer W10882923 is the correct icemaker for the unit. Read More...
Oneal February 11, 2017 for Model Number GI6FDRXXY04 I purchase this unit as a replacement and I noticed the part no is different, It does not work with the original wire harness. Do I need to also purchase a replacement wire harness for it to work.
1 Answer Oneal, It appears that the icemaker harness has not changed and this should work with this icemaker assembly. Read More...
Stephanie February 06, 2017 for Model Number WRX735SDBM00 I have removed my ice maker and the part number is W10377151. I see the replacement part number for this part is W10882923. What are the differences between these two? Did the new part number improve something, or could I just buy the original part number W10377151?
1 Answer Stephanie, The parts will be the same with possibly a design change. The original part is not available and would need to get the new one W10882923. Read More...
1 Answer Mike, This icemaker W10882923 is a complete icemaker assembly and will have all components for the icemaker. Read More...
Matt January 18, 2017 for Model Number GI6FARXXY08 - W10377151 I have the W10377151 ice maker. It stopped making ice. I have tested the voltage on the ice maker and it is fine. If I jumper L and V it gets water. However, when I jumper T and H, I get bizarre behavior. Sometimes, it goes through 1 cycle (yet the water valve never opens). Sometimes, the ice maker starts a harvest cycle but then gets locked up, where I can't even get a voltage reading. And now, I initiated a harvest cycle and it is just continually harvesting (still never opening the valve). Do I just need to replace this ice maker or do I have a bigger problem? Thanks in advance!
1 Answer Matt, This issue would be caused by a fault icemaker which will need to be replaced. Read More...
Sam January 15, 2017 for Model Number MFI2665XEM6 ice maker is no longer working, I have already replaced water valve with no success. my next thought was motor module I thought I had read where 120v should be read across l&n but I cant read any voltage. is there a way to test the motor module?
1 Answer Sam, You will want to Jump out the T to H with an insulated jumper wire with 1/4" stripped off the ends. This should allow the unit to go into a harvest mode. The light switch will also need to be pushed in. You can then test for 120 vac at the V to N to test to see if there is power to the valve. This issue will most likely be a motor module that is the issue. Read More...
Robert N October 18, 2016 for Model Number WPW1037751 Is there any way to adjust the ice maker (part no. WPW1037751) on a Kitchenaid Refrigerator model KFC022EVBL5? I would like to increase the frequency of operation to allow it to make more ice.
1 Answer Robert, Unfortunately there is no way to get the unit to make more ice except you could turn the temp down a little which would allow the ice to freeze a little faster but other than that no way to do this. Read More...
1 Answer Hello Dale. Sorry we do not have a video at this time. We are working daily at adding new videos to our site. Read More...