Fredcu January 19, 2017 for Model Number WSF26C3EXW01 Ice maker not making ice. Water is not getting to the ice maker. I did install a new inlet valve. Still no water to the ice maker. What should I do next? Install a new ice maker?
1 Answer Fredcu, Yes with the icemaker not bringing in water then this would be a faulty icemaker in the unit and would need to replace the icemaker. Read More...
Chuck October 23, 2016 for Model Number WSF26C2EXY02 My ice maker is in the door. it is making really small cubes. What do I need to replace? How do I check it?
1 Answer Hello Chuck. Make sure your filter is good. If so, then it sounds like your water valve is bad and will need to be replaced on the unit. Read More...
Nb May 10, 2016 I have replaced this same unit twice in my KitchenAid fridge (W10122576). It dies, water dribbles out onto the floor and damages flooring, and it stops making ice completely. I replace and am good for about 2.5 years. Have done this twice. Is this newer part # an updated model? What has changed? Have the new ones continued to fail? I'm ready to shut off the ice maker and leave it (I can deal with replacing regularly, but I'm away a lot and have replaced the floor in my kitchen twice due to water damage!!) If this will fix the problem, I'll buy it. If not I'd rather just make ice using ice cube trays to avoid the floor damage.
1 Answer Hello NB. The icemaker has not changed in design. It is not common for them to leak that often. You may have a water valve issue with the unit. Read More...
Jerald December 06, 2015 for Model Number WRS537SIAW00 Why did my icemaker and dispenser in door for for ice stop working, but it still dispense water out of door. If I put power to water valve it will fill up icemaker, but when it freezes it want dump the ice.
1 Answer Jerald, The most likely cause for the icemaker to not get water and dump ice would be a faulty icemaker assembly WPW10251076. Read More...
Steve November 26, 2014 for Model Number gsc25c4eyyoo Refrigerator is 3 years old ice maker all of a sudden stopped making ice. Does the icemaker need to be replaced? What steps do I need to take to troubleshoot the problem?
1 Answer Hello Steve. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Mike May 20, 2013 for Model Number whirlpool model gsf26c5exy00 Mike: whirlpool model gsf26c5exy00 The fridge did not come with an icemaker I need to install a new one....Need instructions to install if possible step by step Part number W10122576
1 Answer Mike, To access the icemaker in your refrigerator you would take the ice bin out and remove the 2 screws that are on either side. Lift up on the casing and lift the casing off. Once off there will be 2 screws holding the icemaker bracket in place. Unplug harness and remove the screws and lift icemaker out. The icemaker part number for your unit is WPW10251076. Read More...
Rick P. May 16, 2012 for Model Number Whirlpool Icemaker Part Number AP4558158 How do you remove the harness wire from the freezer door?
1 Answer Hello Rick. You will lift up on the tab of the wiring connector to remove the icemaker WPW10251076 from the unit. There is no way of replacing the harness inside the door without replacing the door assembly. Read More...