Miroslav September 18, 2012 for Model Number MEC5536BAB Switch for the right front burner (dual) on my Maytag stove (MEC5536BAB) is broken. What is the correct part number? Thanks.
Annu July 25, 2012 for Model Number JEC9530ADB Hi. My switch is broken for the right front burner (if I am looking at it in front of me). Is is the right replacement?
1 Answer Hello Annu! According to your model number the replacement right front burner switch is part number W10823734. Thanks! Read More...
Nancy March 09, 2011 I need step by step instructions for replacing infinite switch AP4009110 on Jenn Air JEC9536ADB.
1 Answer Hello Nancy. Here are the instructions. Hope this helps. Main Top Removal 1. Disconnect power to cooktop. 2. Remove cooktop from cutout and place on a protected surface. 3. Remove control knobs from infinite switches. NOTE: To remove knob(s), slide a rag under the knob and pull upward. 4. Remove screws securing cooktop frame to burner box frame. 5. Remove main top. 6. Reverse procedure to reassemble, verifying that cooktop frame is properly aligned. Infinite Switch Replacement 1. Remove main top, see "Main Top Removal" procedure. 2. Remove screws securing infinite switch to main top and remove switch. 3. Disconnect and label wiring to infinite switch. 4. Replace infinite switch and reverse procedure to reinstall. Go by the instructions with the new switch for wiring the switch. Read More...
Guest March 07, 2011 Hi, I can't figure out how to remove the old wire without breaking it. Could you please explain and/or send me some information on how to? Thanks.
1 Answer Hello. You will need to use needle nose pliers to remove the terminals off the switch. They will pull off. Pull on the terminal, and not the wire. Hope this helps. Read More...