Matthew June 05, 2026 for Model Number JDB1270AWY I ordered part 11 from the rack diagram (fold away tine LATCH) but you sent part 13 (fold away tine PIVOT)
1 Answer Hello Matthew, thank you for contacting AppliancePartsPros.comIf there was an issue with your order, please contact our customer support team at 1-877-477-7278. Read More...
Larry June 11, 2016 for Model Number JDB1100AWS Ordered a tine pivot and latch for the upper rack. The pivot-or clip-#99003105 fits fine.The latch #99003106 seems to be too wide. Am I trying to install incorrectly? If you think it is the right part for this model, can you provide install instructions.
1 Answer Larry, This tine latch WP99003106 is showing to be the correct part for your unit but unfortunately we do not have instructions on installing this part. If this will not work then you may want to see if part number WP99003484 may work in your application. Read More...
Dr August 09, 2015 for Model Number Model #JDB1250AWS, Serial #29270270GT I need to order a replacement part for a broken Fold Away Latch Tine on my Jenn Aire dishwasher Model #JDB1250AWS; Serial #29270270GT. It is the part toward the front of the top rack that holds the left tine stationary and allows the one on the right to fold down. From all the previous questions and answers the part I should order is #9900316 but several customers have said it looks nothing like the original part and it does not fit or work properly as a replacement part. I would like to order the part and hope it works in my case but if it does not is your satisfaction guarantee good to send it back for a full refund, including the return shipping costs? Thank you
1 Answer Dr, The latch for the fold away tine is showing as being part number WP99003106. Here is the link to our return policy http://www.appliancepartspros.com/customerservice/returns.aspx Read More...
Erica April 24, 2015 I ordered both 99003106 and 99003105 because the tines keep falling over on the top rack of my dishwasher. They don't keep the tines standing up. Based on the other questions, it looks like the only way to fix my dishwasher rack is to order a new one for almost $300. Is that correct?
1 Answer Hello Erica. If the clips are not supporting the tines, and you have installed the new clips, you will need to replace the racks on the unit. Read More...
Chasghall September 27, 2014 for Model Number JDB1250AWP Thank you to the poster that took the time and trouble to contact Whirlpool to find the correct folding clip for the upper rack on my Jenn-Air JDB1250AWP dishwasher. I had the very same issue and you saved me tons of time and aggravation. All on-line sites incorrectly list the clip for my dishwasher as 99003106, when mine clearly takes a 99003484. They carry both but I had to search by the correct part number to find it. Received it and it works great.
1 Answer Hello Chasghall, Since the upper rack has been "subbed" to a new part number, the tine assemblies and clips have changed also. The problem is that most part distributors use the manufacturers' parts explosions. Since the manufacturer has not modified any of the listings on this and several other models, the parts that come up are not fitting the rack unless the specific parts for the rack the customer has are what get ordered. I know this is confusing but we cannot change the information until the manufacturer gets the substituted part listings published. Read More...
Dk January 24, 2014 for Model Number JDB1250AWP 99003106 is NOT the correct latch for the top rack. It neither looks nor functions anything like the original part. I think this the reason for so many questions on this part. Can you provide the correct part so that I can finish my repair?
1 Answer Hello DK! The latches listed for the upper rack tines are part number WP99003106 and WP99003105. Any other clips are not available separate from the rack itself, part number W10337961. Thanks! Read More...
Wing January 08, 2014 for Model Number JDB1270AWY I ordered 99003106 to replace the broken one. The part is not the same as the original and does not keep the tine up. It is also wider than the back (99003105). Did I order the wrong parts?
1 Answer Wing, the fold away tine latch part number WP99003106 is used on the top rack tines. The pivot is part number WP99003105. If you were needing the parts for the lower rack tines use part number WP99003003 for the pivot and part number WP99003115 for the latch. Hope this helps you. Thanks. Read More...
Debbie September 10, 2013 for Model Number JDB1095AWB I have a JDB1095AWB with folding top rack tines. The forward plastic part that locks them in place broke off and the back isn't far behind. The replacement part is 99003578 (assembly) but is no longer made. I just need the locking parts, not the tines. What should I order? Thanks.
1 Answer Debbie, The locking tabs come with the tines kit now and are not available individually. You would need to order part number WP99003106. Read More...
Fran January 27, 2012 for Model Number JDB1090AWS/ Serial 36637635LJ The #15 diagram part does not match the present part requiring replacement.
1 Answer Hello Fran! Item 15 in the racks diagram is the clip, part number WPW10257558. Is this what you are needing? Thanks! Read More...
Kimdy January 16, 2012 for Model Number JDB1100AWS My serial number is 33965699JL. The front clip that holds my foldaway tines on the top rack is broken. Like the posters above, the pictures provided do not seem to match what I currently have on there. Thus, I would like to be sure I purchase the right part. In addition, my bottom rack, towards the back right, there are three clips. I would like to replace all three. Which part numbers would they be? They also hold foldaway tines. Thanks!
1 Answer Hello Kimdy! Viewing the diagram the two clips that hold the upper rack tines are part numbers WP99003105 and WP99003106. For the bottom rack tine you will use part numbers WP99003003, WP99003115, and WP99002689. Thanks! Read More...