R Lewis February 06, 2013 for Model Number MH2175XSQ-4 When I attempted to unscrew the cooktop lightbulb it snapped off and is hanging from the base. The bulb faces the wall. I'm thinking of using a mirror and pliers to unscrew the base. Any ideas?
1 Answer Hello R Lewis. You can do that, but make sure the power is disconnected first. If not, it could be dangerous and cause more damage. Read More...
Mary February 05, 2013 for Model Number mh6130xeq0 Light underneath microwave next to fans burned out replaced with new bulbs but bulbs won't turn off they just stay on. Do they need to be the exact size and if they do what size and and part number?
1 Answer Hello Mary, The correct light bulbs for your unit are 8206232A. You would not want to use higher than the recommended wattage but should not matter on the bulb size on the bulbs not turning off. This would be an inication of possilby a bad circuit board sending power to lights continuously or there being a shorted wire completing the circuit. Read More...
Dan Knoll November 29, 2012 for Model Number wmh3205xvs-1 The light under the vent is out. What wattage is it? I put in a 25 watt and it blew out. Thanks.
1 Answer Hello Dan, the correct light bulb 8206232A is a 40 watt, 120 volt bulb. Hope this helps! Read More...
Roger November 20, 2012 for Model Number GH5184XPB-0 I need a replacement light bulb for my Whirlpool microwave oven model GH5184XPB-0 - the bulb is about 2" long and has "KEI 125V 40W" stamped on the base. Thank you!
1 Answer Hello Roger. Based on the model number provided, 8206232A is the correct bulb for the unit. Read More...
Anil November 19, 2012 for Model Number MMV520BWS-1 I need a replacement bulb for microwave hood combination for the model # on the inside.
Don November 17, 2012 for Model Number MH1170XSQ-0 Looking for a proper replacement bulb for the underneath.
Alan November 08, 2012 for Model Number wmh2175xvb-2 My light bulb for lighting under the microwave has burned out. I have tried two different light bulbs that claim to be for appliances, but they are only 25 watts and 15 watts, respectively. Although they each fit the base neither works. I checked the filament on the original bulb and it's definitely broken. Does the replacement bulb have to be the exact bulb as OEM to work? Or do I have two issues going on? Just double checking before I order an exact replacement bulb from you guys.
1 Answer Hello Alan, With the light bulbs 8206232A you may have to try to tighten further. When you install a new light bulb it will reach a certain point where it appears to not want to move further. Try to tighten a little more and it should screw in further. Read More...
Becky November 04, 2012 for Model Number MH1150XMB0 I am replacing the small incandescent bulb on the bottom of the range and since there is ample room for a tube light I am wondering if we can replace this small bulb with a tube type light bulb? It would be nice to have more light for cooking.
1 Answer Hello Becky! If the bulb will physically fit, the base is the same, and you do not exceed the wattage (40 watts) you can use any appliance bulb. Thanks! Read More...
Addison October 21, 2012 for Model Number mn7130xeb-1 How do I take it apart the replace the inside light bulb?
1 Answer Hi. Remove power. Remove all bottom trim plate sourrounding screws to let the plate hinge down and back to remove the bulbs part # 8206232A and replace them. Thank You. Read More...
Cindy October 10, 2012 for Model Number MMV5208WB-1 Hello. I am wondering if you can help me find a replacement light bulb for my Maytag microwave, model #MMV5208WB-1. I thought I had found it (8206232A), but am one digit off on my model # according to your list of models that it works in. I appreciate your input...thank you!!
1 Answer Cindy, if you are needing the lamp that shines down on the cooktop the light bulb 8206232A is the correct replacement. Thanks! Read More...