Stacy September 25, 2018 for Model Number Kerc607hbt6 My oven allows me to only set temperature to 260° or below. If set any higher it says "err" with no accompanying code. Even at the lower temperatures, though, the oven gets extremely hot and burns things within minutes. Any ideas? Stovetop and all other display items appear to be in working order.
1 Answer Stacy, Unfortunately, the console which is what you need is no longer available. The console houses the membrane that connects the keypads to the control. Read More...
Cj March 09, 2016 for Model Number KGST307HWH6 My oven shows "panel locked". I've tried to unlock it (door open, pressing #3 for 5 sec) but nothing happens. If I unplug the unit, it looks like it goes into normal boot sequence, then ends with "panel locked" light again. No keys work. No beeps, nothing. Do I replace the touch panel or the control panel? Also, it appears that the replacement control panel 8184718 (AP3137864) is 1 combined piece, where the original shows 2 in the schematic 9754378 (AP3085940 - discontinued) Am I seeing this correctly?
1 Answer Hello CJ. You will need to replace the control panel 9754341CB it sounds like. The white is discontinued. They only offer the black. Read More...
Louis August 07, 2015 for Model Number KGST307HBS6 My gas range is about 12 years old. With the oven off and no one pressing the keys on the console, the oven displayed a temperature setting (300F) while beeping intermittently, and then displayed an F2:E0 code. The panel could not be reset by pressing any key. Resetting the circuit breaker for the range temporarily fixed the problem, but several hours later the problem reoccurred. This happened for several cycles until I opened up the console, cleaned the panel and checked the circuit board (no obvious problems noted.) When I put the console/computer assembly back on the range, the oven now intermittently beeps while displaying an "oven on" time, and the oven is now inoperative; will not accept any inputs. Should I replace the console (glass keypad assembly) or the computer (circuit board)?
1 Answer Hello Louis. You will need to replace the control panel 9754341CB on the unit for the issue your having. Read More...
David W July 18, 2015 for Model Number KESC307HWH6 Good Day to you. My stove has the F2E3 massage and now the oven don,t come on at all but everything else works what is needed to fix this problem Thanks for your time
1 Answer David, The F2E3 error code means that there was a keypad spill. Either the keypad was held down too long or keyboard short or there was a spill on the keypad switch surface. Clean the control keypad good and if this does not correct then replace the keypad. Read More...
Duane April 12, 2015 for Model Number KESC307HWH6 I did a self clean and the tone alert stopped working. I should have cleaned it the old fashion way since I've heard that self cleaning can cause a lot of failures in the electronics. I assume this is a small sona alert or other device that has a plastic membrane for the sound and in the high heat melted. Is this located on the control board? Thanks
1 Answer Hello Duane, This is usually controlled by the control board 9754383 and the alarm is usually located on this board also. Read More...
Andy October 29, 2014 for Model Number KGST307HBS6 I have a Kitchen Aid stovetop oven Model # KGST307HBS6. The oven goes out after reaching the desired temperature in 10 or 15 minutes and displays the code F1-E3 .We try to restart the oven and it won't restart but displays code F2-E3. We recently replaced the oven igniter and the Top glass console and it worked a couple of times then stopped working again. Can this oven be repaired? Do you think replacing the Micro Computer might be necessary. Any professional advice would be greatly appreciated ! Thank You !
1 Answer Andy, The F1 E3 error code is an indication that there is a misconfiguration on the control board. With this issue and the F2 e3 error code the issue would most likely be caused by the main control board. Read More...
Thorsten July 28, 2014 for Model Number KGST307HWH6 The electronics on our range are not working anymore. The error code is typically F2:E1 but sometimes also F2:E3. Then it works again for a couple of days, sometimes beeps as if someone was pressing keys, then fails again. I disconnected the keyboard, cleaned contacts, seems to make no difference. I see no cracks or anything else suspicious in the keyboard. The $300 question is whether I should replace the electronics or the keyboard/console assembly.
1 Answer Thorsten, The issue would be in the Keypad. The F2E1 is a cancel key error and you would check the connection, which has been done. There for recommends replacement of the console glass. The f2e3 is a keypad spill error which means that the key was held down too long or the keyboard shorted. The part number for the glass is 9754341CB. This is a black part which is what the manufacturer subbed the part to. Read More...
Linda February 25, 2014 for Model Number KGRT607HBS6 The codes on the stove are reading f2:e1 and the stove will not cancel or do anything. What can I do?
1 Answer Hello Linda. Cancel key invalid. You will need to replace the control panel on the unit if the key is bad. Read More...
Flds November 04, 2013 for Model Number KGRT607HBT6 Light not switching off, numbers 3,6,9 not operating. What could be the problem?
1 Answer Hello Flds. It sounds like the console 9754341CB is bad and will need to be replaced in the unit. Read More...
Ellen November 03, 2013 for Model Number It is a KGST307 or KGRT607 or KGST300 or KGST600 or YKGST307 or YKGRT607 We installed the micro computer MPL 8184718 and the system still does not work. The lights come on, the numbers work except for 3, 6, 9 and oven light. You cannot adjust the clock time or engage the oven. The computer goes below the burner on my model. The range is approximatelly ten years old. Thank you for your help.
1 Answer Ellen, The basic post information would indicate you have several inoperative keypad circuits and will need to replace the "Glass Console Assembly" 9751895. Without a proper or complete model number, we cannot be sure of which part you actually need. Read More...