Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Orifice Holder (Tcb) by Whirlpool

Best Seller
Manufacturer Part
4.89 (64)
By: Whirlpool
Part Number: OEM18042309
Manufacturer Part Number: WP9761639

This orifice holder serves the gas surface burner position designated TCB. It directs gas from the valve to the burner and provides a stable mount for the igniter and burner head to maintain reliable ignition and flame performance.

  • Routes gas from the manifold/valve through the orifice to the burner head
  • Supports proper alignment of the burner head and cap
  • Provides mounting point for the surface igniter/electrode
  • Failure symptoms include a burner that won't light or is slow to ignite, weak or uneven flame, or igniter clicking without ignition on that burner
What's included: One TCB-designated orifice holder. Install notes:
  • Disconnect power and shut off the gas supply before servicing
  • Allow the cooktop/range to cool completely
  • Remove burner cap and head; lift top as required. Transfer the brass orifice and igniter/electrode from the old holder if applicable, then install the new holder
  • Reassemble, restore gas/power, and check all connections for leaks with a soap solution. Verify proper ignition and flame

More
$121.57

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Questions & Answers

For Whirlpool Orifice Holder (Tcb) (Part Number: OEM18042309)

1 Answer

Hello Greg. You slide the clip off the igniter. You can use an icepick to help you do this if needed.

Read More...

1 Answer

Hello Janie,

You can test the ignitor for this model by putting a ampmeter on the wire for the ignitor. If you are getting amperage then you have a bad ignitor WP9761639. If you do not have amperage then you have a bad spark module WPW10331686.

Read More...

1 Answer

Hello Kevin. No, the only way to replace the igniter on the unit is to order the burner assembly WP9761639. It is not available separately. Hope this helps.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google