J June 27, 2013 for Model Number WFW9700VW 00 I have an WFW9700VW 00 and accidentally ordered a water level switch W10249845, which I now know is for WFW9700VW 01. I should have ordered W10415587 for WFW9700VW00. Apparently I should have cross checked more oneline parts sites before ordering. I can make the part fit by breaking off a plastic tab on the male part of the electrical connector, but don't want to mess something up. Do you know if W10249845 can be used interchangeably for W10415587, or how else I can find out?
1 Answer Hello J, If the part is not listed for your model number specifically, there is a difference that will prevent the unit from operating as it was originally designed. You need to return the part and order the correct one. Give us a call at 1-877-477-7278 and we can set you up a return authorization. Read More...
Greg February 22, 2013 for Model Number Maytag 5000 washer I have now had my 3rd water level switch fail in less than a year and a half. The part W10249845 was installed for the third time less than two months ago. What causes this to fail so often?
1 Answer Hello Greg. It is not common for the switch to fail that much. Check and make sure the hose is ggod and the wiring on the unit. Read More...
Scott W. July 30, 2012 for Model Number WFW9500tw02 My Washer needs the switch for the lower access panel. Not sure looking at the IPC which one it is? Looking at the front of the washer it is on the frame right of the pump. Has the F32 code when the panel is in place. works great with the panel off. Can you help me with the part number? Thanks.
1 Answer Hello Scott! The microswitch beneth the lower panel is part number WPW10085220. There are usually two per unit. This item comes one per package. Thanks! Read More...
1 Answer Hello Duane. The water level switch WPW10249845 is removed by twisting it after the wires and the hose are removed from the unit. Then you will twist and lock the new switch in place and attach the wires and the hose to the unit. Read More...
Necole C. December 18, 2011 for Model Number Maytag Washer 5000 I was trying to install a new pressure switch (part #AP4411837)in my Maytag washer (MHWE500VW10), and I think I pushed the circuit board back - can I still use the part?
1 Answer Hello Necole. Yes, as long as the board did not break, the water level switch WPW10249845 should be fine on the unit. If the board broke, you will need another switch. Hope this helps. Read More...
Penelope August 02, 2011 for Model Number WFW9600TW01 My Whirlpool Duet Washer (WFW9600TW01) needs a pressure switch, but the correct one for my model has been discontinued and I don't see mine on the list of cross referenced models below. Will AP4411837 work for me, or if not, what part number do I need?
1 Answer Hello Penelope. Based on the model number you provided, WPW10415587 is the correct pressure switch. Hope this helps. Read More...
John July 15, 2011 When do you anticipate the AP5264563 to be available? I ordered one last night after reading the entire thread and seeing my model listed in someone else's question. Is the delay in this part because of the problems in Japan or the excess demand for this part? Thanks.
1 Answer Hello John! The water level switch part number WPW10415587 has an estimated time of arrival of 08/03. Please keep in mind this is an estimated time of arrival and is subject to change at any time the manufacturer is unable to keep their promise date with our company. Unfortunately, we do not have the reasons as to why the part is on a longer eta time. Thanks! Read More...
John July 14, 2011 for Model Number Whirlpool WFW9600TA00 I'm having the same problem as everyone else, code SUD then F35. Which analog preasure switch fits my unit? Thanks, John.
1 Answer Hello John! The analog pressure switch used on your Whirlpool model WFW9600TA00 is part number WPW10415587. Thanks! Read More...
Jerry May 11, 2011 for Model Number MHWE500VW11 Can part # AP4411837 be used in my washer (MHWE500VW11)? The analog pressure switch listed for my washer shows not available. If this isn't a replacement, then what is?
1 Answer Hello Jerry. Yes, WPW10249845 does fit your model number you provided. Hope this helps. Read More...