James A January 24, 2016 for Model Number AMANA TB25S5L REFRIGERATOR Need a ice maker for this refrigerator, what model would I use?
1 Answer James, If this model had a icemaker previously installed then it would take part number D7824706Q. Read More...
Bill January 23, 2016 for Model Number RCE224TD Every time I enter my model #RCE224TD I'm asked Does the # end in V or M. My refrigerator only shows the # above. Also I am trying to order the ice maker even though mine works but the ice tray is flaking off whatever finish is on it and spoiling the ice cubes. Is there a remedy for this other than a new ice maker? Please tell me the proper model # for my ice maker. It is in a Magic Chef refigerator. Thank You, Bill
1 Answer Bill, There is no remedy for the flaking of the ice mold. The only thing you can do is to replace the icemaker. The icemaker part number for your unit is 4317943. Read More...
Bill January 19, 2016 for Model Number magic chef #RCE224TD My ice tray is flaking and throwing impurities into the ice cubes. Do I need to replace the whole ice maker or can I just replace the ice tray #17 in your parts display? Thank you, Bill
1 Answer Bill, The manufacturer is not offering the ice mold as a separate part and you will need to get the icemaker assembly D7824706Q. Read More...
Did January 11, 2016 I need the hinge part that has two screws attaching it to the top of the box and the ice maker door swings on this. In other words, I need only the hinge and/ or the door. My icemaker is good.
1 Answer Sorry, We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Joel January 08, 2016 for Model Number ABB2524DES I am replacing the ice maker for my Amana fridge and want to make sure I have the correct part. Is part #AP2984633 for $106 the correct replacement? If not which one is it? Thanks
Fred January 07, 2016 for Model Number MSD2456GE I have replaced my ice maker and it makes ice fine. My problem is the water overfills and runs into the freezer area. What controls the amount of water that is dispensed
1 Answer Hello Fred. If the icemaker is overfilling, replace the water valve. However, if the icemaker is leaking, just replace the icemaker. Read More...
Jeff January 01, 2016 for Model Number 4317943 It's been 36 hours and seems to only be making ice cubes sparingly, is there an adjustment valve to make ice faster?
1 Answer Jeff, There is not an adjustment for faster ice. You will want to check the temperature in the freezer compartment to make sure that it is getting down to between 0 and 5 degrees which if it is not then it will cause the issue you are having. Read More...
Beverly December 14, 2015 My son replaced the ice maker in my whirlpool fridge. He used the old wiring as it did not have a plug to the fridge. The replacement is a whirlpool replacement but after more than 24 hrs I still have no ice. Is it the wiring? The old wiring was operating before.
1 Answer Hello Beverly. It could be the wiring. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Lonnie December 14, 2015 for Model Number GS6SHAXMB00 I am replacing my ice maker with one that has a bail arm, when I take it off (because my does not use one) how can i by pass it?
John December 11, 2015 for Model Number Amana BB120TPSW I am installing a new ice maker. How many times do I need to dump the ice for break in before I can use the ice?
1 Answer John, You need to dispose of the first three(3) or four(4) batches of ice cubes produced by the new ice maker. This will usually flush and remove any residual dirt, dust, etc from the ice maker mold and tubing. Thanks and Good Luck Read More...