Customer Questions and Answers for Gas Range Spark Module by Whirlpool

Robert, Thank you for your question. For this issue, the spark switches will be the most likely cause for this issue. The part number for the spark switch will be WPW10184468.

Steve N, Based on the information and model number provided the issue in question is likely the surface ignitor switches, wiring harness, or spark module. The oven has separate glow ignitors.

Ben, This would likely be the spark module, but you will need to check to see if you are getting power to the spark module with a multimeter as this could be a power/wiring issue.

Ben, This would likely be the spark module, but you will need to check to see if you are getting power to the spark module with a multimeter as this could be a power/wiring issue.

Nick, The spark module for this unit will be part number 74009098.

Hello mustang67, the spark module is located at the bottom right once the right side panel is removed.

Hello Anthony, one of more of the ignitor switches are faulty, they are part of the harness, WP74007696.

Bernard, Check under the unit where the storage drawer is and it should be on the right side rail.

Hello Martha, the spark wires are part, WP5111A360-60 (4 needed) however they are discontinued.

Frank, the spark module 12001596 should be located in the back of the appliance on the bottom right-hand side of the unit.