Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Suspension Spring by Whirlpool

Best Seller
Manufacturer Part
4.89 (64)
By: Whirlpool
Part Number: OEM18030513
Manufacturer Part Number: WP63907

The Suspension Spring is an OEM part for Whirlpool washing machines. It helps support the washer tub and absorbs shock as the tub moves during the wash and spin cycles, ensuring stability and reducing vibrations. This spring is essential for maintaining the washer's balance, preventing excessive movement, and minimizing noise during operation.

Causes of a bad suspension spring can include wear and tear from regular use, overloading the washer, or damage from unbalanced loads. When the suspension spring fails, it can lead to increased vibrations, noise, and potential damage to other components of the washing machine.

Symptoms of a bad Suspension Spring include:

  • Excessive shaking or vibrating during the wash cycle
  • Loud banging noises
  • Washer moving or "walking" during operation
  • Uneven or off-balance loads

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart

Questions & Answers

For Whirlpool Suspension Spring (Part Number: OEM18030513)

Debbie for Model Number lsq8000lq2

I had changed the water pump and O-ring because my machine was leaking. Put the machine back together then on the spin cycle the banging started and the machine would move around on the floor..The next thing that was changed was the suspension spring(AP4459650/W10250667)...The problem still exists. According to your website there is another sping (AP3120822/8316845)which I did order, however I can not figure out where that one would go. Could that be my problem? If so where does that spring go? or is my problem the 3 black suspension springs? Please help....

1 Answer

Hello Debbie. The suspension spring WP63907 is located at the bottom of the floater plate. If they are broke or bad, it will cause the problem you are having. Lift upward on the tub assembly and make sure it is centered on the floater plate properly. If you fell it pop back into place, it should fix the problem. Hope this helps.

Read More...

1 Answer

Hello Bruce. You will need to check and see if the suspension spring WP21001598 is off of the washer. It hooks to the back of the tub assembly and goes down to the frame of the unit. If so, it will cause the problem your having. Hope this helps.

Read More...

1 Answer

Hello Fred. Based on the information you provided, it sounds like the suspension spring WP63907 is broken. It keeps the tub centered and it helps balance the machine. Hope this helps.

Read More...

1 Answer

Hello Kc. WP63907 is the three springs for the plate assembly. They are located on the sides of the plate assembly. Hope this helps.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google