Carolyn April 01, 2023 for Model Number KEHC309JSS08 Good morning! I need to replace the microwave door spring. I want to replace both the left and right springs. What do I need to order?
1 Answer Good morning Carolyn, The right side is part number WP4451009 and the left is WP4452395. Read More...
Steven October 26, 2021 for Model Number RMC305PVS01 i NEED THE PART 4375326, BUT CANNOT FIND. IS THERE ANOTHER PART NUMBER I CAN USE/SUBSTITUTE? THANKS
1 Answer Steven, Unfortunately, this spring 4375326 has been discontinued by the manufacturer with no suitable replacement available. Read More...
Eric August 05, 2021 for Model Number RMC305 This question pertains to torsion spring replacement on the microwave door of a Whirlpool traditional oven/microwave unit The model # I listed is for a Whirlpool oven/microwave combo. I made a typo earlier (sorry) and this number appears both on the electric lower oven and also on the microwave instruction manual, so the model number must apply to both ovens. The only numbers I see on 2 stickers on the microwave itself are 8538 793 54002 and below that is XNO1619950. (There is no reference to a model or "mod" number.) This is on the left side at the bottom after opening the door. At a similar position on the right side of the door is a sticker that reads ""Microwave UL File No: E150072 SP" along with a compliance statement regarding radiation. The torsion springs need replacing for the microwave door. Is there a left and a right torsion spring, and is there one of the wonderful videos on this replacement that you all do? Thank you!
1 Answer Eric, The torsion spring for this unit will be part number WP4451009 for the right side and WP4451008 for the left side. Unfortunately, we do not have videos showing how to replace the torsion spring. In general you would put the hook end in first then you will need to get the other side in and may have to torque the torsion spring to get it to go. Read More...
Eric August 05, 2021 for Model Number rmv305PVS01 The model # I listed is for a Whirlpool oven/microwave combo. The torsion spring needs replacing for the microwave door. I "think" the Whirlpool part number for the spring is 4375326. Do you have this part, and is there only one torsion spring on the unit? Also, is there one of the wonderful videos on this replacement that you all do? Thank you!
1 Answer Hello Eric, please recheck the model number as it shows as an invalid model number and repost your question so we can locate the correct part for you. Read More...
Irene January 14, 2021 for Model Number KEMC378KSS04 I need a torsion spring for model kemc378kss04 for my microwave door stainless steel model.oven and micro combination. Was told I needed to use wp4452398 for left and right side is that correct? And how much should it cost?
1 Answer Irene, the right-hand torsion spring WP4452396 and left-hand torsion spring WP4452395 would be used with the model provided. Read More...
Marty November 17, 2020 for Model Number KBMC147HSS04 Right side door tension spring for a stainless steel model seems to be either WP4452396 or WP4452398. Is there a difference between these two? The last time I replaced it (along with the left WP4452395) it broke within a couple months. Is one of these parts stronger than the other?
1 Answer Marty, Based on the model provided the manufacturer shows the two springs to be the same left and right, but the stainless model uses a different set of springs than the other colors. The torsion springs for Bl/Wh/Bt Models are our part number WP4451008 and the mfg. part number 4451008. And the torsion springs for the stainless models are our part number WP4452398 and the mfg. part number 4452398. Read More...
Jeng Elage April 19, 2020 for Model Number KEMC378KSS02 I have the stainless steel model combo oven which I read needs stronger torsion spring. I would like to replace both of them at the same time. Could you please provide the part numbers for the left and right side. Thanks very much.
1 Answer The part numbers for the stainless steel models are WP9760577 for the right hand, and WP9760574 for the left-hand side. Read More...
Scott January 29, 2020 for Model Number KEMC378KSS04 I need the Microwave Door Torsion Spring for both the Left and Right side for KitchenAid Model #KEMC378KSS04. I found Part # WP4452398 (AP6009428) is the Torsion Spring for the right side. What is the part number for the Torsion Spring for the left side? Thank you
Gary January 07, 2020 for Model Number GE ZSC1201NSS01 Which of your part numbers are the correct replacement door hinge closure/tensioning springs for the GE ZSC1201NSS01 microwave?
1 Answer Gary, unfortunately, the manufacturer does not list serviceable parts for the door assembly WB56X10872 of your model. As such is the case, the door assembly would be what is needed to repair a loose hinge. Read More...
Ken T January 24, 2019 for Model Number kehc379jss04 Part wp4452398 right torsion spring. I am trying to figure out if I need a right or a left. The springs extend from one side to the other. One side of the spring has a big hook on it. Does the side where the big hook attaches denote Left from right or is it the other side that denote left from right?? Thanks