Charlotte J. January 30, 2012 for Model Number MFI2568AEQ I snapped the little peg that attaches to the flip top lid that covers the deli drawer. It's attached to a very large piece and I can't see how it could be fixed. Looking into the frig, it's the little peg for the right side of the deli drawer lid. There is a little hole in the deli drawer lid that slides through and retracts when reattaching the lid. What part do I need to order to fix the problem and how hard is it to fix?
1 Answer Hello Charlotte! You will need the pantry endcap, part number W10874836. Here is our repair forum link for you to register and inquire on the installation process. Thanks! http://forum.appliancepartspros.com/ Read More...
Kile June 18, 2011 for Model Number Maytag MFD2561hes The crisper stud broke off but the cripser support is fine. I can't figure out how to get the remainder of the stud out of the wall. How is that connected? It doesn't seem to push in or slide. If I can get out I assume I need part AP4070209 repair kit.
1 Answer Hi Kile. You can try to use small " pick-tools" to get the broken crisper mount stud out. I have also slightly pushed the old one to the side very carefully in the cabinet for just enough room to install new crisper frame supports part #WP12603701.Thank You. Read More...
Tom May 01, 2011 for Model Number Amana AFI2538AES Answers (as it seems is everything to do with this problem) are confusing. First, how does a part (AP4070209) that sticks out 1 1/2 inches from the liner replace a part (AP4014182) that only sticks out 3/4 inch from the liner when the slot in the crisper drawer frame is only 3/4 inch deep? Second, why would part AP4014182 push/slide into a hole in the liner? It's the part that slides onto the stud (which, along with AP4014182, AP4070209 is supposed to replace). Third, how does AP4070209, which looks to be less than 1/4 inch wide, keep the crisper drawer frame , which has a slot in it to accept the support that's about 3/4 inch wide, from moving forward and backward when the crisper drawer is opened/closed?
1 Answer Hello Tom. To answer your first question, part WP61005050 is a repair kit used if your support broke off and damaged the inner liner. If your inner liner is not damaged you will only need to order part # WP12603701. Second, the way the support was designed is something we cannot control and is determined by the manufacturer. Third, the manufacturer provided this part as a repair kit, only if the inner liner has been damaged. To properly use the kit you would slide the hook end into the inner liner and place the support on the flat end. Thanks! Read More...
Randy March 15, 2011 for Model Number ARS9265BB How does part no. AP4014182 attach to the inside? Does it push through, glue in? Thanks
1 Answer Hello Randy! The crisper frame supports WP12603701 should push/slide into the holes within the refrigerator liner. Hope this helps! Read More...
Paul March 08, 2011 My shelf support is in good condition, however I need the shel stud that is affixed to the cabinet. Do you have that part available?
1 Answer Hello Paul, if you are looking for the part that the support WP12603701 will slide down onto. You will want to order part WP61005050. Thanks! Read More...