Adrain April 16, 2012 for Model Number Mhwe300vw12 My fabric softener doesn't dispense. I have cleaned the wash box. Does this switch have anything to do with it. Water only goes on one side of the wash box not the fabric and bleach side.
1 Answer Adrian, Were the dispenser switch/ motor assembly bad, I'd expect a F 30 fail code. I'd expect you to have an issue with the dispenser linkage WP8183183, WP8183184,WPW10161052 or diverter nozzle WP8181712. Once you unplug the power cord and remove the washer top panel, you'll be able to determine the issue. If you remove the lower access panel, you should find the tech date/information sheet and conduct the diagnostic codes and operate the individual components from the control panel. Thanks and Good Luck Read More...
Mhensley October 10, 2011 for Model Number Whirlpool Duet Washer WFW9200SQ00 When the washer tries to start all you here is clicking coming from behind the soap dispenser area and water will not enter the washer. Is this a water valve issue or something else.
1 Answer Hello Mhensley. Based on the information you provided, it sounds like the dispenser switch WPW10352973 may be bad and will need to be replaced. Remove the top and see if the switch keeps turning and does not stop. If not, replace the switch. Hope this helps. Read More...