Clem L. September 08, 2011 for Model Number FET 100 I have an Old Jenn Air (Moden Maid) Model FET100 cooktop with surface burners. I need a switch for the number one burner. There are four switches, they all have five wire connections except the 1st burner switch which has six wires. I need this switch, part number would help.
1 Answer Hello Clem! There are four burner switches on your product that the manufacture lists as part number R0702021. The only other switch is the fan switch 0042048 which has been discontinued with no replacements or cross references available. Thanks. Read More...
Joan B July 30, 2011 for Model Number GS563lxsb 0 This is a gas stove. The front left burners knob was bumped and for some reason the medal piece that goes to the knob won't go back into the stove. Its as if that piece inside got damaged. Please help I need that part that the knob goes onto and that medal piece that goes to the knob. Thank you.. I hope you understand what I am trying to explain.
1 Answer Joan, I believe you're looking for the left front burner valve WP9757218 based on your post description, Thanks Read More...
Eddie June 28, 2011 for Model Number Whirlpool RF3028XEW Element heats up without switch being turned on. I have replaced switch.
1 Answer Hello Eddie. You will need to look for a burnt or a shorted wire going to the element. Test and trace to where the power is coming from. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Carlos P. April 20, 2011 for Model Number Whirlpool Electric Range RF3020XG surface burnerswitch Can you please tell me the part number for my Whirlpool Electric range surface burner switch and if you have it? The pilot red light for the front left burner remains "ON" when I turn the switch knob off and the burner remains hot. I am assuming that the switch is bad. Can you please advise?