Ira January 13, 2023 for Model Number ACD2238HTS Okay simple question I changed everything it would take to make the refrigerator get cool still nothing . Freezer still not getting cold Motors running compressor seem to be on. Could it be the defrost switch not letting it get cold . Or loss of freon in the system No way to check that without placing a tap in. Thanks
1 Answer Ira, as the fans and compressor are operating, the evaporator can be inspected for a frost pattern. If there is not a frost pattern after 30 minutes of compressor run time, there would be a sealed system failure that would require an EPA-certified technician for repair. Read More...
Kl January 09, 2023 for Model Number KSRB25FHBL03 what terminal does the black wire go? and is there thermal fuse and thermostat? can't find them in the frig.
1 Answer KL, There is a defrost bimetal on the evaporator and the black lead for the timer will go to terminal number 2. Read More...
Gregg G December 01, 2022 for Model Number 1068579280 I brought a W10822278 defrost timer and I am not sure which terminal the black should be put on. Please advise. Thank you Kenmore 106.8579280 side by side
1 Answer Gregg G, If the timer harness Has a white wire use terminal #1 for the black wire and if the timer harness does not have a white wire use terminal #2 for the black wire. Read More...
Kevin November 27, 2022 for Model Number 10673832301 what terminal does the black wire attach to for a kenmore coldspot 10673832301?
1 Answer Kevin, If there is a black wire on the refrigerator harness then the black lead on the timer will go to terminal number 1 and if there is not a black wire on the refrigerator harness then it will go to terminal number 2. Read More...
Buicklover November 20, 2022 for Model Number ET16AKXSW02 Hi. I am writing about the defrost timer part for this old Whirlpool Frig from the 1980's. I have a green wire attached to the old timer. i thought I read it's okay to not attach the green wire. The old timer has a metal top. Also, I'm not sure, but there may be two black wires attached to the old timer, The new one has only one. What port should I attach the wire to for model ET16AKXSW02. Thank you so much. -BL
1 Answer Buicklover, Take the black wire on the new part and push it onto pin 2 then reconnect the plug. Read More...
Rick November 18, 2022 for Model Number ED5CHQXKB05 I am replacing the defrost timer. On the replacement defrost timer, there is a black wire that is not on the original part. Where would I connect the black wire from the new timer?
1 Answer Rick, Thanks for the question!!! For this model refrigerator, the black wire will go on terminal 1. Read More...
Steve November 01, 2022 for Model Number ET21GKXHW00 Hello wondering which terminal to connect black lead wire to on fridge model ET21GKXHW00. Thanks
Mick October 23, 2022 for Model Number ED5GVEXVD03 No instructions with the defrost timer. Which terminal for the black wire . My Model is ED5GVEXVD03
1 Answer Mick, This unit does not have a defrost timer but uses a defrost control board which is part number WPW10366605. This cannot be modified. Read More...
Frogger October 18, 2022 for Model Number KSRF42DTX20 I bought the W10822278, but there were no instructions. Where does the black wire go with my model? Thanks.
1 Answer Frogger, The black lead wire will go to terminal number 2 on the timer for your model. Read More...
User4673 October 11, 2022 for Model Number 106.70842101 I installed the defrost timer 2 days ago with the black wire on terminal 1. The ice maker has not worked since. Any suggestions?
1 Answer User4673, The defrost timer does not have any effect on the icemaker not operating other than if the temperature in the freezer is not between 0 and 5 degrees it will not cycle. Read More...