Tommy January 16, 2018 for Model Number 106.59592992 Part W10822278. Which terminal does the black wire go? Thanks.
1 Answer Hello Tommy. You will need to install the black wire onto terminal number 2 of the timer. Thank you. Read More...
George January 08, 2018 I need to know where the black wire on my new Kenmore refrigerator timer goes, part W10822278. Model 106.59099993. Thanks
1 Answer Hello George, You will need to put the black jumper wire on the number 1 terminal on replacement defrost timer W10822278. Read More...
Steve Fox December 07, 2017 for Model Number Kenmore Coldspot 106.72102101 I purchased a new defrost timer from your parts department. Which meal tang does the wire go over for my Kenmore Coldspot 106.72102101 model?
Peter December 07, 2017 for Model Number 106.8582710 I have the new defrost timer W10822278. Where do I put the black wire?
1 Answer Hello Peter, The black jumper lead should connect to terminal number 1 on part W10822278. Read More...
Steve November 21, 2017 for Model Number 106-8552780 I am installing defrost timer 483212 (old number) on refrigerator 106.8552780. Where does the black wire attach to, 1 or 2 connector?
1 Answer Hello Steve. You will need to install the black wire onto terminal number 2 of the defrost timer. Thank you. Read More...
Zach C November 13, 2017 for Model Number EF19MKXSM01 There was a new 6 hour defrost time installed in the refrigerator, the previous one failed after 28 years. The issue is, I can manually turn it to defrost and can here the timer run and see the gears turn, the freezer defrosts. After defrost is complete, you can no longer hear the unit turn. I marked the unit to verify the rotation. The unit does not turn as it should between defrost times. Looking for a possible explanation.
1 Answer Zach, There is a black lead wire coming off the timer that you will want to make sure that it is on the proper terminal. This will be based off the wiring of the unit and there should have been an instruction sheet telling which location to put it. Read More...
Aaron November 11, 2017 for Model Number ET18NKXFW01 - Whirlpool Which location on the replacement timer do I need to place the black wire on?
1 Answer Hello Aaron. You will need to place the black wire onto the terminal number 2 of the timer. Thank you. Read More...
Ernie October 30, 2017 for Model Number 106.59267990 kenmore I am replacing the defrost timer and like many unsure which terminal to put the black wire on. I did not receive the instruction sheet, I am unable to compare wiring schematics. Can you please give me the correct location to put the black wire. Thank you
1 Answer Hello Ernie. You will need to place the black wire onto terminal number 2 of the defrost timer. Thank you. Read More...
Terry October 25, 2017 for Model Number ED25RFXFN01 I am installing a Defrost Timer W10822278 (AP5985208) on my Whirlpool ED25RFXFN01. Can not find a wiring diagram or information on what run application this unit is. I think it is a continuous run application and the loose black wire goes on terminal number 1. Can you verify?
1 Answer Hello Terry. Yes, install the black wire onto terminal 1 of the timer. Thank you. Read More...
Matthew October 15, 2017 for Model Number 60262990 Kenmore Coldspot Like many in this thread, I would like to know which lead on my replacement defrost timer the black wire goes over. Thanks!
1 Answer Hello Matthew. You will need to place the wire onto the number 1 terminal. Thanks. Read More...