Njtech2 October 15, 2017 for Model Number ED20PKXBW00 Do you have a wiring diagram for my model or maybe you can advise where the black wire for the defrost timer hooks up? Thank you.
1 Answer Hello NJtech2. The black wire goes to terminal number 2 of the defrost timer. Thanks. Read More...
Paul R October 10, 2017 for Model Number ET8WTKXKB08 Black wire for ET8WTKXKB08? came on terminal 1, is shutting cooling off but isnt kicking element... also has newer t-stat.
1 Answer Paul, The defrost timer black lead should be on the number 1 terminal and if the heater is not coming on then will need to check to make sure that the defrost thermostat has continuity. If there is no continuity then it will be faulty and need replaced. Read More...
John September 26, 2017 for Model Number ED5HVEXVQ02 Where does the black wire on replacment timer go? 1 or 2 Thanks John
1 Answer Hello John. You will need to place the black wire onto terminal number 2 of the timer. Thanks. Read More...
Barry September 25, 2017 for Model Number ET20DKXAW00 I'm replacing the defrost timer, but don't know where the black wire should be connected to. TIA for your help.
1 Answer Hello Barry. You will need to place the wire on to the number 2 terminal of the timer. Thanks. Read More...
Larry September 25, 2017 for Model Number ED22RFXFWO3 I have a Whirlpool refrigerator model number ED22RFXFW03 that I’m replacing the defrost timer. Where do I need to stick the black wire? Not sure if it’s cumulative run or continuous run. Thank you.
1 Answer Hello Larry. You will need to attach the black wire to terminal number 2 of the timer. Thank you. Read More...
Cate September 24, 2017 for Model Number ET21PKXGW02 Hi what number do I put the wire on for the defrost timer?
Kld September 07, 2017 for Model Number ET8CHMXKQ03 What number prong does that black wire have to go to on the replacement defrost timer?
1 Answer Hello KLD. You will need to place the black wire onto terminal number 2 of the timer for your model. Thanks. Read More...
Sean August 28, 2017 for Model Number ET18NKXXW01 Which pin on the defrost timer does the black wire go on?
1 Answer Hello Sean. You will need to place the wire onto terminal number 2 of the defrost timer. Thank you. Read More...
Kim August 22, 2017 for Model Number 106 8790612 Does the black wire on my new defrost timer go on 1 or 2 terminal?
1 Answer Hello Kim. You will need to place the wire onto terminal number 2 of the timer. Thank you. Read More...
Eva August 21, 2017 for Model Number EV160NZTQ02 Hello, Please help me determine which terminal the black timer motor lead goes on. I have the wiring diagram on the back of my freezer but its confusing and the wire colors are different from the manual. Terminal 2 has a yellow wire. 1 has black wire. 4 has blue wire and 3 has white wire. I would appreciate it very much. Thank You
1 Answer Hello Eva. You order the wrong timer. You will need to order WP3-81329. Thanks. Read More...