Joe M. June 24, 2011 for Model Number ETW 4300 TQO The water comes in very slow, then fast. It does this on the rinse cycle too. It occassionaly stops. Could this be a timer problem?
1 Answer Hello Joe. This is normal operation for this model of washer. This washer has ATC (Automatic temperature control). It turns on both valves, then one, then both again, to adjust the water temperature. Hope this helps. Read More...
Roosevelt S. May 20, 2011 for Model Number LXR7244JQ3 - Series CR1309117 Washing machine fills with water upon initiating a wash cycle. Once the tub is full, the washer stops and will not respond on any manual settings. Do I need to change the timer?
1 Answer Hello Roosevelt. You will need to check and see if the lid switch AP3100003 is bad. If so, it will prevent the unit from running the cycle. You can test this with a multi-meter MA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Roosevelt S. May 19, 2011 for Model Number Model LXR7244JQ3 - Series CR1309117 Washer stopped in mid rinse cycle. Control knob no longer responds on any setting. Should I change the timer?
1 Answer Hello Roosevelt. You will need to check and see if the lid switch 3949247V is bad. If so, it will prevent the unit from spinning and finishing the cycle. Hope this helps. Read More...
Roosevelt S. May 19, 2011 for Model Number Unknown In response to your question, I could not find model number.
1 Answer Hello Roosevelt. Here is a link to help you locate the model number. Hope this helps. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Roosevelt S. May 19, 2011 Washer stopped in mid rinse cycle. Control knob no longer responds on any setting. Should I change the Timer?
Bbaca May 09, 2011 for Model Number whirlpool model # WTW559FTO serial # CU3530192 Washer won't start nor fill with water, only enters spin cycle if placed manually is it best to change the timer?
1 Answer Hello. If your unit does not fill or agitate when the timer is calling for these functions but will go into spin when put the timer into that cycle manually. You might have a defective timer WP8572976. Here is a link to our hassle free return policy: http://www.appliancepartspros.com/customerservice/returns.aspx . Thanks! Read More...
Bbaca May 09, 2011 for Model Number 8572976 Valves will not open to allow washer to start. Washer will not do anything but enter the spin cycle. Plan on changing the timer is this the best option?
1 Answer Hello Bbaca. Can you provide the full model number so we can help you with this? Thanks. Read More...