Peggy July 24, 2012 for Model Number LAT9356AAE Serial #25077443WQ What timer would we need for this model and serial number?
1 Answer Hello Peggy. Based on the model and serial number you provided, WP22003361 is the correct timer for the unit. Read More...
David April 14, 2012 for Model Number LAT9406AAE Which one I need use for my parts? part AP4027880 or AP4029051 model:LAT9406AAE serial#: 11241473SB
1 Answer Hello David. Based on the model and the serial number, 22003365 is the correct timer. Hope this helps. Read More...
Wesley March 10, 2012 for Model Number LAT9356AAE The washer fills, then starts to agitate. It stops periodically and will restart once you press the ring on the timer or advance the timer. What does this sound like to you?
Cl February 25, 2012 for Model Number LAT2300AAE When replacing old timer with new timer, does the wiring harness pull out or unplug from old timer?
1 Answer Hello CL. Yes. The wiring harness has a locking clip that has to be depressed and it pulls out of the timer WP22003361 with minimal force. It has to have some pressure on it to make electrical connection. Hope this helps and have a great day! Read More...
Bobby February 09, 2012 for Model Number LAT9356AAE While agitating when I lift the lid it should stop agitating. When I have the lid open and push the lid switch it starts agitating again. So this should mean the lid switch is ok? So should I replace the timer? My orginal question was will go into spin cycle.
Bobby February 02, 2012 for Model Number LAT9356AAE Serial # 25094225WZ Make Maytag Style (Y) Y7909201 this is the washer I have.The problem fills with water slow and while going though the cycle when it gets to the spin cycle it stops. What parts will I need to correct this problem? Thanks
1 Answer Hello Bobby. For the water issue, you will need to replace the water valve WP22002360, and for the no spin, check and see if the lid switch WP22004243 is bad and will need to be replaced in the unit. Hope this helps. Read More...
Den D September 12, 2011 for Model Number LAT9356AAE how is the test done on timer to see if it is the problem? PART # AP4029051
1 Answer Den, You'll need a multi meter TJMA-DMT3 the wiring diagram and cam chart ( those should be in the inside of the console) and set the timer to the section of the cycle you wish to check, and remove the wiring plug and check the corresponding timer terminals for a closed circuit. It can be tricky for a novice. You did not mention what was the issue. Thanks and Good Luck Read More...
Dean June 27, 2011 for Model Number LAT9406AAE What is the difference between part AP4027880 and AP4029051?
1 Answer Hello Dean! There is a series change within the timers used on your model LAT9406AAE. If you would like to resubmit with your serial number provided we will be glad to verify the correct timer for your unit. Thanks! Read More...