Dave May 28, 2011 for Model Number Amana SCD23VW I have the same questions as the others here. Specifically, I received a new Start-Dev AP4369220 and my wire connections need to have new connectors put on it. Easy enough, only I'm not sure where those four wires need to connect to the new part! The new part has two terminals labeled L and N and then two wide slots in the middle. The old part had two black wires, a white wire, and a blue wire. A black and a white shared one connector and then the blue and a black were on the overload relay (not sure which color to put on which connector on the new overload relay...labeled L and N.)
1 Answer Hello Dave. According to the information provided by the manufacturer, the Blue will connect to L, white connects to N. Regarding the two black one's, you will have to adapt the female ends to male and connect it to the center of the start device. Thanks! Read More...
Jonathon May 25, 2011 for Model Number Amana sxd26vw I received this part, but it is different from my original relay (brown with exposed terminals). This part has recessed terminals that my connectors will not fit inside and two slots that appear to accept wide, thin terminals. I'm not sure how to adapt my wires to fit this new relay. Is there an adapter kit? Why didn't it come with this part, since it was suggested as a replacement?
1 Answer Hello Jonathon! The manufacture does not supply an adapter. If the wires do not fit the current relay WPW10189190 you will need to change the terminals on the wires to fit the new relay. You can do this by cutting the old off and crimping the new on. Hope this helps! Read More...
Scott D. May 14, 2011 for Model Number ARS2367AB Yes, Please send a picture of the AP4369220 and if there is any special wire harness or wiring modification instructions available if needed for the redesigned part.
1 Answer Hello Scott! We will need for you to post your e-mail address in the question body (we will not post this) in order for us to e-mail the picture. Thanks. Read More...
Scott D. May 14, 2011 for Model Number ARS2367AB I have attempted to purchase the start relay for my noted Amana refrigerator several time but always receive a replacement part that looks nothing like the original and does not have the same wiring connections. If I order your part AP4369220 how can I be sure it is the correct part without you showing a picture. I was told by Whirlpool that it no longer exists. Please advise. I see other parts on your site that look correct like AP3601983.
1 Answer Hello Scott! The start device part number WPW10189190 is the most updated starting device used on your model ARS2367AB as the original has been redesigned from the manufacture. If you would like to respond back with your e-mail address in the question body (we will not post this) I will be glad to send a picture of the product. Thanks. Read More...