1 Answer Hello Mel. The F1 error is a difficult problem to pin down but most times it means the central control needs to be replaced. The F1 is a communication error that occurs when the central control and motor control are not talking to each other. Between the two is the door latch assembly which might also be at fault. Check and make sure the connections are good on the motor control and the central control. If so, you will need to replace the central control unit WPW10525353. Hope this helps. Read More...
Stephanie April 30, 2011 for Model Number AP3952890 In the back of the circuit board, the connector is not staying attached and the power is not staying on. It is the part in the different views Picture (4th picture). It is the connector with the black wire and about 7 white wires. Is there a certain way this should be connected? I am trying to just plug it straight in and it is not staying.
1 Answer Hello Stephanie! From the description supplied, there seems to be an issue at the connector or the connection peice. You will need to see which part is broken and replace the part needed. Thanks. Read More...