Mike January 11, 2013 for Model Number gc5shgxls01 The ice tray filler tube has been freezing up. Can it be the valve inlet (#2199838)? Thx
1 Answer Hello Mike. Yes, if the valve has a slow leak, it can cause the unit to freeze up. Read More...
Jazzy October 13, 2012 for Model Number gc5shaxvs00 The water dispensor keeps dripping water. I assume the water valve is bad. What is the part number to replace?
1 Answer Hello Jazzy. Based on the information you provided, it sounds like the water valve W10247725 is bad and will need to be replaced. Read More...
Dan July 08, 2012 for Model Number 2199838 My problem is water drips at the dispenser. Is replacing a new valve right solution to solve this problem?
1 Answer Hello Dan. Yes, if there is no power coming to the wires attached to the valve, and the water is dripping, you will need to replace the water valve 2199838 on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Ron December 21, 2011 for Model Number KSFS25FJBT01 We have a slow drip from the water dispenser right at the outlet. The fridge is almost 11 yrs.old. We use the filtered water extensively & the filter was replaced about 1 month ago. I'm betting the valve seals are just worn out. What do you think?
1 Answer Hello Ron. Yes, if the filter is new, and there is no air in the lines, you will need to replace the water valve 2199838. Hope this helps. Read More...
Mike November 25, 2011 for Model Number KSFS25FKBT01 Very slow flow from water despinser...Ice maker making hollow ice cubes
1 Answer Mike, If you haven't yet, check and replace th water filter first EDR5RXD1, A clogged filter will reduce the water pressure and flow to the door dispenser. Then move to the water inlet valve 2199838 You most likely have debris built up in the debris screen, slowing the water flow, based on your description. Don't forgrt to flush the water supply line, before you attach it to the new inlet valve, and follow the flushing instructions for the new filter as well. Good Luck and Thanks Read More...
Joe October 03, 2011 for Model Number KSCS25FKSS00 Hi ! Cold water works ok but no ice, I replace ice maker still no ice, I checked voltage on inlet valve, no power, can you tell me what cause?
1 Answer Hello Joe. You will look for voltage at the water valve when the icemaker cycles. If there is voltage there and the unit does not bring in water, you will need to replace the water valve 2199838. Hope this helps. Read More...
Troy July 17, 2011 for Model Number GD25SFCHS11 Where is the water inlet dual valve (solenoid) located?
1 Answer Hello Troy. The water inlet valve 2199838 is located on the back of the refrigerator, behind the bottom panel. Hope this helps. Read More...