Parts for Brute 13AL795T057 / 2010: .Quick Reference Brute Parts

This replacement part is a bagger and is intended for use with lawn mowers. This part is compatible with various kinds of lawn mowers. The bagger is responsible for collecting the leaves and other debris during use so that the user can clean up more easily. A new bagger might be needed if the current part is no longer working properly or is damage. If the part cannot stay attached to the lawn mower, it might be best to replace it altogether. If the bag has visible tears or rips, consider replacing this part as well. This should be a fairly simple repair. This is a genuine replacement part made by MTD, sold individually.

High blades are used on lawnmowers and perform well in all conditions. They are curved on the ends more deeply than low blades, which creates more suction to circulate the cut grass and discharge the clippings more efficiently. High blades work well in deep or wet grass and are less likely to cause clogging. High blades can wear out or become damaged with time and will require replacement.To replace a high blade for a lawnmower, find out what corresponding sized wrench is required to loosen the bolts affixing the current blade. Ensure that the lawn tractor is completely cool before starting, and always wear gloves when working with lawn tractor blades. Remove the old blade, and clean up around the area where the new blade goes before installing and securing it tightly.The high blade is an authentic OEM part made by the MTD manufacturer. The blade is 23.5 inches and is only compatible with the MTD brand lawn tractors with the matching star pattern. It is made of durable, high-quality metal. This is a single lawnmower blade. If two lawnmower blades are required, they must be ordered separately.

Battery does NOT contain battery acid

This air cleaner filter is a genuine MTD part, sold individually. This air cleaner filter can be used as a replacement part in a lawn mower. The purpose of the air cleaner filter in a lawn mower is to protect the internal machinery from debris. To ensure the lifespan of a lawn mower, the air cleaner filter should be checked regularly and replaced if it is damaged or significantly dirty.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This air cleaner filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, and Simplicity.

This fuel cap is a genuine MTD part, sold individually. This fuel cap can be used as a replacement part in a lawn mower, snowblower, or wood chipper. This fuel cap seals the fuel tank on these types of equipment.The fuel cap in a lawn mower, snowblower, or wood chipper might need to be replaced if the component is chipped, dented, punctured, or otherwise damaged. If this damage leads to a fuel cap through which materials can pass, the fuel cap should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel cap is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This oil filter is an OEM replacement part sourced directly from the manufacturer for use on lawn mowers and lawn tractors. The oil filter removes contaminants from the oil that accumulates over time from the dirt and debris flying around when the grass is cut. If the oil filter becomes clogged, the engine won't have enough power to operate correctly, the engine may sputter, or there may be smoke coming from the exhaust. The oil filter should be checked every time the oil is changed and any time there are symptoms of a dirty air filter. The oil filter does not require tools to remove and replace. However, the engine should be cool and the key and spark plug removed for safety. Park the lawnmower on a flat surface and locate the oil filter. The filter is threaded. Turn it to remove the oil filter from the lawnmower. Dispose of the old filter. Screw the new filter in and return the spark plug. Start the engine and look for smoke or any signs that there is oil coming out.This oil filter is a yellow metallic part that is sold individually. This oil filter is designed for use in lawn mowers and tractors designed by MTD and Cub Cadet.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This authentic OEM replacement ball joint assembly is a part of the front suspension of a lawn tractor or riding mower. Suspensions are complex systems that include joints, bushings, and bearings that must all work together to turn and maintain contact with the ground. This ball joint assembly helps to connect all of these components. It works similarly to a human hip in that it has a joint and a ball that allows for pivot motions. The most common reason for a ball joint assembly to go bad is if it loses lubrication or becomes gritty. In order to work smoothly, these joints must stay well oiled or else they will grind and break. If the ball assembly breaks, use a wrench to disengage the wheel and change out the part. This is a fairly straightforward repair and should not take more than a few minutes. This replacement assembly is a high-quality part for Cub Cadet, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Bolens, Ryobi, and Yard Man machines. This part is sourced from the original parts manufacturer and ships individually.

This fuel filter is a genuine MTD part, sold individually. This fuel filter can be used as a replacement part for lawn mowers, snowblowers, pressure washers, generators, tillers, log splitters, lawn tractors, and wood chippers. The purpose of the fuel filter is to prevent the accumulation of external materials such as dirt, debris, and pebbles from entering the fuel line.If the fuel filter is punctured, torn, scraped, or eroded to the point that external materials can pass through it and enter the fuel line and the fuel tank, the component must be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, Cub Cadet, Murray, Wheel Horse, Lawn Boy, Snapper, and Simplicity.

When interlock switches are working properly, they will keep the engine from starting if there is no foot is not on the brake or if the parking brake is not set. When the switch breaks, it will not allow current to reach the starter even when the brake is on, which means the engine will not start. If the solenoid is not clicking when the ignition key on the tractor or mower is turned, the interlock switch is likely to blame. This is a genuine OEM replacement interlock switch that can help get a lawn tractor up and running again. Is is compatible with riding tractors and mowers from many different brands, including Craftsman, Bolens, Yard Machines, Yard-Man, MTD, and Troy-Built.

The nut-hex flange 5/8-18 features a hex nut with a wide flanged portion at one end. This flange will act as an integrated washer that does not spin. Since the flange acts as a washer, it ensures that the nut can fasten to the material's surface evenly. If any of these nuts are removed from a machine to do other work, it is recommended to replace them with a new nut-hex flange. Check the nuts that are currently on the machine at least once a year. Make sure they are properly tightened and that they are in good condition. Replace them as needed. This OEM part will work for many types of equipment, including lawnmowers, edgers, snowblowers, and lawn tractors. The part will work with many brands, including Ryobi, Poulan, Bolens, Yard-Man, MTD, Yard Machines, and Troy-Bilt.