Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
The fuel filter on lawnmowers and lawn tractors provides the engine with protection from contaminants that could be in the fuel. If the fuel picks up debris, the filter prevents this debris from causing engine damage. The fuel filter also keeps debris from entering the fuel tank during operation. Fuel filters should be changed on a regular basis to ensure the engine remains protected. If the engine begins backfiring or won't start, check the fuel filter to see if it is clogged.Empty the fuel tank before replacing the fuel filter on the equipment. Locate the fuel filter inside the fuel tank or in line with the fuel lines. Remove the old filter and dispose of it. Install the new filter and put fresh fuel back into the fuel tank. Start the engine and check to make sure fuel is flowing correctly to ensure the filter was put back in place. This fuel filter is an authentic OEM replacement part sourced from the manufacturer for use on lawnmowers and lawn tractors. It is sold individually. This fuel filter is designed for use on lawn mowers and lawn tractors manufactured by Jonsered, Craftsman, Toro, and Cub Cadet.
This is a replacement throttle cable that is designed for use with select lawn tractors. The throttle cable is what controls the speed of the engine. When the metal lever is engaged, the machine will shift into high or low gear. The durable metal part is subject to constant vibrations and repetitive motion, and could break or become worn over time. It is also attached to a cable that is made of durable rubber and metal materials, which connect to the engine to control the opening and closing of the throttle. This cable can also become worn, brittle, or damaged over time and will need to be replaced. The entire piece is sold as a single unit and does not include any other parts or hardware. This genuine throttle cable is manufactured to OEM standards by MTD. It is compatible with machines from MTD, as well as those from Troy-Bilt, Murray, and Yard Man. Be sure to allow the mower to cool completely and disengage the engine before performing any repairs. Wear gloves for hand protection, as well.
This replacement part is a bagger and is intended for use with lawn mowers. This part is compatible with various kinds of lawn mowers. The bagger is responsible for collecting the leaves and other debris during use so that the user can clean up more easily. A new bagger might be needed if the current part is no longer working properly or is damage. If the part cannot stay attached to the lawn mower, it might be best to replace it altogether. If the bag has visible tears or rips, consider replacing this part as well. This should be a fairly simple repair. This is a genuine replacement part made by MTD, sold individually.
This air cleaner filter is a genuine MTD part, sold individually. This air cleaner filter can be used as a replacement part in a lawn mower. The purpose of the air cleaner filter in a lawn mower is to protect the internal machinery from debris. To ensure the lifespan of a lawn mower, the air cleaner filter should be checked regularly and replaced if it is damaged or significantly dirty.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This air cleaner filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, and Simplicity.
This is a two in one blade that can be used as a lift blade to bag clippings, as well as a side discharge for clippings. It is time to consider replacing this blade when there are uneven or even missed areas of cutting or bagging when using the mower. It may be that the blade has been dulled by prolonged use or bent or damaged by striking rocks and dense roots. Either way, replacing the blade is a relatively easy repair to make and should be considered a part of routine maintenance. The repair requires the use of the proper tools, including wrenches and sockets. An appropriate flange bolt may need to be purchased as well if the original has been damaged or worn. "This OEM replacement cutting blade works with more than 150 types of tractors and mowers made by Craftsman, Yard Machines, Yard-Man, MTD, and Troy Bilt. This ships singly and is a high-quality blade made of durable materials.
This fuel cap is a genuine Husqvarna part, sold individually. This fuel cap can be used as a replacement part for a lawn tractor. This fuel cap provides covering for the fuel tank and fuel line of the lawn tractor so that debris cannot enter through the fuel line and damage the engine.The fuel cap might have to be replaced at some point within the standard lifespan of the appliance if it cannot serve its function of protecting the engine from damage. This could occur if the fuel cap goes missing or if it is damaged in the form of punctures, tears, rips, scrapes, or erosion so that external materials can pass directly through the cap and into the fuel line. If this is the case, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel cap is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Man, and Craftsman.
This is an oil filter that facilitates the removal of harmful contaminants from the engine oil. This part is designed to help maintain the optimum performance of an engine in compliance with the necessary EPA emissions regulations. It is recommended that the oil filter is replaced annually or every 100 hours. Remember to prepare something to catch the oil when replacing the oil filter. The old one will need to be unscrewed to replace it, but be sure to coat the seal of the new filter with oil before installing it. To ensure that the new oil filter is in place, make sure it touches the plate it seals against by giving the filter a firm turn to tighten it down. This replacement part is an individual genuine OEM part. It is compatible with small engines, lawnmowers, generators, snowblowers, and wood chippers from Toro, Lawn-Boy, Simplicity, Snapper, and Briggs & Stratton.
This replacement part is a belt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This belt is found inside the engine and helps keep spinning or rotating parts running smoothly and without too much friction. Belts are usually made of a durable rubber that can last for many uses.A new belt might be needed if the engine seems to be running less smoothly than normal. It is possible that the belt can become worn or stretched over time and might need to be replaced. Be sure the appliance is turned off before replacing the belt as it is typically close to moving parts that can cause injury. Be sure to consult an owner's manual before attempting to repair this part.This part is a genuine OEM replacement part and is sold individually. This part is sourced directly from the manufacturer to ensure that it correctly matches with the desired equipment.
This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.
When interlock switches are working properly, they will keep the engine from starting if there is no foot is not on the brake or if the parking brake is not set. When the switch breaks, it will not allow current to reach the starter even when the brake is on, which means the engine will not start. If the solenoid is not clicking when the ignition key on the tractor or mower is turned, the interlock switch is likely to blame. This is a genuine OEM replacement interlock switch that can help get a lawn tractor up and running again. Is is compatible with riding tractors and mowers from many different brands, including Craftsman, Bolens, Yard Machines, Yard-Man, MTD, and Troy-Built.
The nut-hex flange 5/8-18 features a hex nut with a wide flanged portion at one end. This flange will act as an integrated washer that does not spin. Since the flange acts as a washer, it ensures that the nut can fasten to the material's surface evenly. If any of these nuts are removed from a machine to do other work, it is recommended to replace them with a new nut-hex flange. Check the nuts that are currently on the machine at least once a year. Make sure they are properly tightened and that they are in good condition. Replace them as needed. This OEM part will work for many types of equipment, including lawnmowers, edgers, snowblowers, and lawn tractors. The part will work with many brands, including Ryobi, Poulan, Bolens, Yard-Man, MTD, Yard Machines, and Troy-Bilt.
The Lawn Mower Spindle Assembly is an OEM part for MTD lawn mowers Located in the mower's lower deck, the spindle assembly connects the blade to the drive belt. This enables the mower to cut grass effectively. This assembly is comprised of an adapter and a spindle. It gets activated as a pulley spins the drive belt. While designed to withstand minor impacts, larger or harder objects may cause damage. Damage can lead to blade misalignment or detachment.
You should replace the spindle assembly if it becomes damaged due to impacts with rocks, roots, or other hard objects, or if it wears out over time from regular use. A faulty spindle assembly can lead to uneven cuts, excessive vibration, and potential damage to other mower components.
Symptoms of a bad spindle assembly include:
This OEM part is compatible with various brands under MTD, including Cub Cadet, Troy-Bilt, Yard Machines, Bolens, and some Craftsman models.