Parts for Craftsman 12AVD2B8799 / 2014: .Quick Reference Parts

This self-propel cable is a genuine MTD part, sold individually. This self-propel cable can be used as a replacement part in a lawn mower. The purpose of the self-propel cable, otherwise known as a control cable, in a lawn mower is to allow the operator of the appliance to drive it forward when the cable is engaged and to stop the appliance in its tracks when the cable is not engaged.The self-propel cable in a lawn mower might need to be replaced if it is frayed, torn, ripped, scraped, punctured, eroded, warped, or otherwise damaged. If this occurs, the self-propel cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. This replacement should be facilitated in accordance with a proper set of instructions sourced from a relevant appliance handbook or manual.This is a genuine OEM from the manufacturer. It is sold individually. This self-propel cable is compatible with the following outdoor appliance brands: MTD and Craftsman.

This cover is a genuine MTD part, sold individually. This cover can be used as a replacement part in a lawn mower. This cover helps to protect the mower from exposure to dust and the elements.If the cover is punctured, ripped, torn, or otherwise leaves the lawn mower exposed, the cover should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This cover is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This is a Briggs and Stratton air filter for walk behind mowers. It protects the engine from dirt and other debris, keeping equipment running at peak performance. Air filters should be replaced annually at minimum, and should be checked as part of routine maintenance on a mower. A dirty or damaged air filter can potentially cause a host of issues in the mower, from overheating to engine damage. A visual inspection should be enough to tell if the air filter needs to be replaced.To install this part, remove the knobs and cover from the filter's housing. If necessary, remove the foam pre-cleaner, and then the filter, itself. Clean the area of any dirt or debris, then slot the new filter into place. To complete the install, replace the cover.This is a genuine OEM part sourced directly from the manufacturer. It is compatible with mowers from MTD, Troy-Bilt, and Yard Machine. No other hardware is included in this purchase.

This replacement part is a wheel intended for use in lawn equipment. This is a genuine replacement part made by MTD. Wheels are an important part in this appliance as they allow the user to move the machine with ease and precision. Many different appliances are made to be easily transported and moved around, and these wheels make that possible. A new wheel might be needed if the current ones are worn down or broken in any way. It is not unusual for this part to require replacement after years of normal use as the wheels might lose traction overtime. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is suggested that the user refer to the reference guide for directions on how to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This grass bag frame is a genuine MTD part, sold individually. This grass bag frame can be used as a replacement part for a lawn mower. The purpose of the grass bag frame is to extend over the grass bag and provide a housing so its placement is maintained. The grass bag frame might have to be replaced at some point within the standard lifespan of a lawn mower in the event that the component suffers damage rendering it beyond functionality. This could occur if the frame is punctured, torn, or eroded such that it can no longer maintain the placement and stability of the grass bag. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. It is a simple replacement that will require no special tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This grass bag frame is compatible with the following outdoor appliance brands: MTD and Craftsman.

This replacement part is a grass bag intended for use in lawn mowers. This is a genuine replacement part made by MTD. This bag is used for collecting grass as the user is mowing. The cut grass gets pushed behind the machine and collected inside the bag for easy disposal after the job is complete.A new grass bag might be needed if the current one is damaged or broken in any way including being bent, snapped, cracked, or chipped. It is also possible that these bags develop holes over time after many years of use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. To replace this item the user will need simple household tools including pliers and possibly a screwdriver.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This is a genuine replacement for select walk-behind push lawn mowers. The hinged mulch cover is designed to replace the clippings chute that allows discharge so that the grass is more finely mulched in the machine. This part includes a metal hinge, which can break or snap over time. The plastic itself can also become damaged by debris or impacts, or simply crack due to age. Replacing the mulch cover with a genuine OEM model like this can be the ideal solution. If the cover is not replaced, the mulching feature will not be able to be used. This OEM replacement mulching cover is compatible with lawn mowers from MTD, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, and Husky. This product includes the metal bracket and spring that are required for installation and securing the cover, sold as a single assembly. This hinged mulching cover can be used with 150+ lawn mowers from the brands listed above. No tools are required for this part replacement but it is important to be careful of pinch injuries when working with parts like this spring-hinged cover.

Designed for comfortable mowing, this trail shield attaches to walk-behind lawnmowers. It secures to the back of the deck on the lawnmower and prevents grass and other debris from reaching the person using the mower. This trail shield is made of durable plastic but can become damaged use. If it is broken, it will not be able to keep grass from collecting behind the mower deck, so it will need to be replaced.To replace the part with a new shield, put the lawnmower on a stable surface and ensure it is powered off. On the original trail shield, find the metal clasps that hold it secure. Unclasp each of these and remove the trail shield from the lawnmower. The new replacement part can be attached and the lawnmower will operate correctly.This trail shield is an authentic OEM replacement part that is directly sourced from the manufacturer. It is an individual component and does not come with hardware. The part is compatible with lawnmowers by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, Huskee, Murray, MTC, and Yard Machines.

This replacement part is a hex bolt. It is a genuine replacement part made by MTD. Hex bolts are named because they are shaped like a hexagon and are different from the regular circle-shaped bolts. These parts are able to hold other parts secure and in place so that everything can operate as needed. A new hex bolt might be needed if the current ones are damaged in any way. It is possible that these bolts become stripped or lodged in place over time due to normal wear and tear and should be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous part is stuck. Be sure the engine is completely powered down before beginning this repair. This bolt is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

A side discharge chute is engineered to move the debris away from the machine's underside. This is because grass that is not only long and thick but also moist can get trapped and clog the deck and the blades. When this happens, you will have to stop to clear the accumulated clippings periodically. To mitigate clogging and maximize cutting, using a side discharge chute is ideal. When a side discharge chute is installed, but clogging still occurs, there might be a problem with the chute itself. It can be torn or already loose. Luckily, installing a brand-new side discharge chute is easy and will take less than 5 minutes. Start the installation by removing the spark plug. The engine should be cool to the touch. Then, lift and hold the mulch cover up. Take the brand-new side discharge chute and hook the tabs on to the hinge pins. Then, release the mulch cover. MTD manufactures this brand-new side discharge chute. It is an original replacement with Craftsman, MTD, Murray, Yard-Man, Yard Machines, Bolens, Huskee, and Mastercut lawnmowers. It comes in solid plastic material with a black finish. This side chute is sold individually.

A mulching blade has a unique curved or angled design that allows discharging, bagging, and mulching. If its edges are already dull, it can lead to longer mowing time and frayed and torn grass blades. Mulching blade installation is easy. First, unplug the spark plug wire. Then, position the lawnmower on its side. Get a woodblock, preferably 6 x 2 in size, and put it between the old blade and housing deck. Make sure that the wood will prevent the old blade from moving. Take a socket wrench and remove the blade’s nut and washer. Remove the old blade and put the new mulching blade in. Put the nut and washer back and tighten until it is secured. You can use the woodblock to prevent the replacement blade from moving when it is tightened. This mulching blade replacement s an original MTD product. This OEM mulching blade can be used for MTD, Craftsman, Cub Cadet, Murray, Yard-Man, and Bolens lawnmower models. This brand-new mulching blade is sold individually. The support blade and screw hex are sold separately.