Parts for Craftsman 247.23000 / 2011: .Quick Reference Parts

This is a fuel cap assembly that is for use in a wide range of lawn and garden equipment. The fuel cap plays a simple but important role in these machines. It is used to cover the refill nzle of the fuel tank. It ensures that there is no risk of debris getting into the tank and that the gas does not evaporate. If there is damage to the cap, or if it is missing, the owners will want to replace it right away.The fuel cap is made from durable plastic, and it should last a long time. However, it could become damaged due to use, an accident, or simply because of wear and tear. There is also the risk that it could become lost. Replacing the fuel cap is fast and simple, and no tools are required. Owners can remove the old part and screw the new one onto the machine.This fuel cap is compatible with select models of tillers, shredders, and mowers from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Yard Machines. It is sold individually and is a genuine OEM replacement part.

This control cable is a genuine MTD part, sold individually. This control cable can be used as a replacement part in a tiller. The purpose of the control cable in a tiller is to give the operator control over the propelling features of the appliance through engagement and disengagement of the cable so that when the cable is used, the tiller moves across a variety of surfaces at a regulated speed.The control cable in a tiller might need to be replaced as a result of general wear and tear from long-term use or after collision with a hard object. If this occurs, the control cable should be removed and replaced by this genuine OEM replacement part before the operator uses the tiller again.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: MTD and Craftsman.

This replacement part is a throttle knob. This part is a genuine replacement part made by MTD. This part is typically found in lawn mowers and assists the user in controlling the throttle of the machine properly. The throttle then adjusts the settings inside the engine so that the user is able to control the speed and power of the appliance. A new throttle knob might be needed if the current one is damaged or missing in any way. It is possible that over time this part might become worn down with normal wear and tear and need to be replaced. This part is made of durable plastic and should be fairly simple to replace. This throttle knob is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This power cord extension is a genuine MTD part, sold individually. This power cord extension can be used as a replacement part for a snowblower. This power cord extension lengthens the reach of the power cord so that the appliance can be used from a greater distance from its direct power source while it is plugged in. The power cord extension might have to be replaced at some point if the cord suffers damage that renders it beyond functionality. This could occur if the cord is frayed, if it gets wet, or if it is punctured, torn, scratched, or eroded to the point that it does not power on the snowblower when properly plugged in. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This power cord extension is compatible with the following outdoor appliance brands: MTD, Toro, Cub Cadet, Ryobi, Tecumseh, Lawn Boy, Huskee, Montgomery Wards, Bolens, Yard Man, Troy-Bilt, and Yard Machines.

A tiller can ease pre-planting preparation difficulties such as breaking up compact soil manually. Available in front-tine or rear-tine, this versatile machine's main component is the tines. This part is responsible for loosening the soil. It consists of four rotating metal blades in a unique curved shape in opposing directions. The standard layout of tines is that two blades are curved towards the tiller while the other two are pointing away. This blade configuration prevents soil build-up and is more efficient at digging. Even one damaged blade could drastically reduce the efficiency of a tiller. Several tines may be needed depending on the severity of the tiller tine damage. We carry brand-new tiller parts manufactured by MTD. This genuine OEM part is an all-metal replacement designed for tillers from MTD, Yard-Man, Cub Cadet, Ryobi, and Yard Machines. A wrench is the only tool needed to install this replacement successfully. The required bolts are not included in this purchase. The articulating tine is sold individually.

This part is a replacement shift rod knob. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or faulty shift rod knob in tillers.The shift rod knob enables the user to easily and comfortably shift the tiller gears. It will need to be replaced if worn, broken, detached, or lost. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular shift rod knob, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This shift rod knob can be used with a variety of different tiller models manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This is a genuine replacement wheel assembly for several tillers. The wheels on a tiller allow the machine to move forward and backward. They roll as the tiller breaks up the soil, and help the operator to travel across the ground. Sometimes, wheels lose their seal or become damaged, which causes the tire to lose pressure and flatten. If the pressure in each tire differs, it will cause the tiller to pull to one side while operating. This makes it very difficult to control and till in a straight line. In this case, the tire may need replacing. Replacement is simple and fast and doesn't require any tools. Remove the pin in the center of the wheel, lift the front of the tiller, and remove the tire from the axle. Slide the new tire onto the axle, line up the holes and install the pin. This can be done in a matter of minutes.This genuine OEM replacement tiller wheel assembly is sold as an individual part and is shipped directly from the manufacturer. This part is compatible with several tillers made by MTD, Yard Man, Troy-Bilt, Cub Cadet, and Husky.

This is a V-belt made for use with several tillers made by various manufacturers. It is the component responsible for rotating the tiller tines in the tiller, and it is the primary belt used in the equipment. Each belt is made of durable rubber but can break, wear out, or stretch out over time. If these things occur, the V-belt will need to be replaced to ensure the tiller continues to do its job.As the tiller is used more often, it becomes more likely that the V-belt will need to be replaced. Mechanical failures and other issues can sometimes cause the V-belt to wear out quicker than usual. If the V-belt has become overly worn, it can cause the tiller to perform poorly since the belt might slide off of the pulley. If the belt breaks entirely, the tiller will no longer run. Before replacing the belt, remove the spark plug wire and drain the fuel.This is a genuine OEM replacement V-belt that is directly sourced from the manufacturer. It is made for use with tillers manufactured by Yard-Man, MTD, Yard Machines, Craftsman, Ryobi, Huskee, MasterCut, and Cub Cadet.

This replacement part air cleaner is an OEM part for use in small engines used in outdoor equipment, such as tillers and dethatchers. The air cleaner is responsible for ensuring that clean air is brought into the engine to provide optimal performance. It is a good idea to inspect the air cleaner assembly regularly to ensure that there is no damage or cracks that could allow dirt and debris to get into the engine. If there are any issues, get a replacement before operating the engine again. This will ensure that there is no additional dirt getting into the engine. The genuine OEM air cleaner is a quality item that comes from the manufacturer. It is sold individually. It can work with tillers and other machines from top brands like MTD, Craftsman, and Yard Machines.