Parts for Craftsman 247.770120 / 2007: .Quick Reference Parts

This is a chipper blade, which is installed on wood chippers and is used for cutting up pieces of wood into small chunks. Chipper blades need to be sharpened at least once a year or after about 25 hours of use. If the chipper blades aren't maintained, they will become dull and won't provide the required level of cutting power needed for wood chippers. If wood chips from the chipper are uneven, shredded, or rough, then sharpening or replacement may be needed. Make sure to take out the spark plug before the hopper is removed and connected to the tool. Next, remove the housing around the blades and the rotor assembly. The bolts around the blades can be taken off using an Allen wrench. Remove the blades, but be sure that work gloves are used to prevent injury. The replacement blade can be installed at this time. This is an OEM replacement chipper blade that can be used on wood chippers from Craftsman, MasterCut, Cub Cadet, Yard-Man, Yard Machines, and MTD. It's sold individually and comes directly from the manufacturer. The replacement will require an Allen wrench set, a wrench set, a socket set, and pliers.

This part is a replacement discharge chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or faulty discharge chute in a variety of chipper or shredder models.This discharge chute ensures that debris is efficiently expelled from the chipper or shredder. This part is subject to significant wear and tear and therefor may require replacement. Proper tools are required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this discharge chute, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this discharge chute is suitable for use on several different models of chipper/shredders manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a snap mount safety switch that is a part of many types of lawn and garden equipment. The safety switch is made of plastic and has a metal four-pronged plug on the bottom. A button is located on the top. Inside of the base, there are two sets of contacts. One set is used to create a circuit between two blades, while the other set makes the circuit for the other pair of blades. One set is grounded and the other connects to the engine of the tool.Replacing the safety switch is required if it is no longer working or has been damaged. Turn off the tool, allow it to cool, and disconnect the spark plug wire. Remove the engine cover before taking off the fuel tank assembly. The engine blower housing will also need to be removed. Access the snap mount safety switch and take it out of the tool before attaching a new switch.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The snap mount safety switch is designed to be used with wood chippers, leaf blowers, and lawnmowers manufactured by Craftsman, Yard Machines, Cub Cadet, Yard-Man, and MTD.

This is a Briggs & Stratton Original Equipment 491588S Air Filter Cartridge. The purpose of this filter is to prevent dirt, dust, and debris from contaminating the carburetor and damaging the engine. This flat panel style, pleated paper air filter provides the first line of defense against the destructive effects of dirt ingestion. It is designed for 3.5 through 6.75 HP quantum engines and 625-1575 series engines. Over time, the air filter can get clogged or damaged, and this can lead to reduced engine performance. Locate the air filter cover, unscrew it, and remove the old filter. Make sure to clear out any debris that has found its way into the air filter assembly before inserting the new cartridge. Reattach the air filter cover and secure it with the screws. This replacement part works with generators, lawnmowers, pressure washers, wood chippers, and tillers. Aside from Briggs & Stratton, it is also compatible with specific products from Craftsman, Husqvarna, Lawn-Boy, Toro, Troy-Bilt, Simplicity, Snapper, and Wheel Horse. It is a genuine OEM replacement part and is sold individually.

This part is a spark plug that is used on a number of lawn and garden power equipment. A spark plug is used as part of an internal combustion engine. The spark plug delivers the electric current from the ignition system to the engine.A new spark plug may be needed after normal wear and tear over a period of time. The operator of the outdoor power equipment may notice that the engine misfires or it is difficult to start. If this is the case, a new spark plug will be needed. Never perform care and maintenance on outdoor power equipment that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This spark plug is a genuine MTD part. It is sold individually. This particular spark plug is compatible with various outdoor power equipment that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This is a replacement flail blade that is used with various models of chippers and shredders. The purpose of the flail blade is to rotate so it can shred grass and other types of debris. The blade will attach to the impeller assembly. It will help to break down the material, as long as it is in good condition. The flail blade works hard, and it is sometimes in contact with materials that could cause damage. The blade could become bent or broken. In some cases, it could become corroded and rusty. When the flail blade is in poor condition, it will no longer work as efficiently or effectively as it once did. If they are no longer in good condition, owners will want to replace the flail blades on their machines as soon as they can. This is a genuine OEM replacement flail blade. It is sold individually, but machines may require more than one. Buyers should consider replacing them all at the same time. The blades are used specifically for chippers and shredders. They are compatible with models from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Yard-Man, and MasterCut.

This grass catching bag assembly is a genuine MTD part, sold individually. This grass catching bag assembly can be used as a replacement part in a lawn mower. The purpose of the grass catching bag assembly is to provide a storage place for grass clippings.The grass catching bag assembly might suffer damage that could necessitate its replacement within the standard lifespan of a lawn mower. This could occur if the grass catching bag assembly is ripped, torn, punctured, frayed, or otherwise damaged. If the grass clippings fall out of the bag, that is a sign that the bag needs to be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This grass catching bag assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This fuel filter is a genuine MTD part, sold individually. This fuel filter can be used as a replacement part for lawn mowers, snowblowers, pressure washers, generators, tillers, log splitters, lawn tractors, and wood chippers. The purpose of the fuel filter is to prevent the accumulation of external materials such as dirt, debris, and pebbles from entering the fuel line.If the fuel filter is punctured, torn, scraped, or eroded to the point that external materials can pass through it and enter the fuel line and the fuel tank, the component must be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, Cub Cadet, Murray, Wheel Horse, Lawn Boy, Snapper, and Simplicity.