Parts for Craftsman 31A-3CDE799 / 2006: .Quick Reference Parts

This part is a motion drive belt that is used on snowblowers. The motion drive belt is the component that rotates the auger.A new motion drive belt will be needed if the original is cracked, broken, or damaged in any way. The motion drive belt may need to be replaced due to normal wear and tear over a period of time. The operator may also notice a squealing noise during operation. The engine may also begin to overheat if this part is beginning to fail. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This motion drive belt is a genuine MTD part. It is sold individually. This specific motion drive belt is compatible with snow blowers that are manufactured by MTD, Yard-Machines, and Craftsman.

This impeller is a genuine MTD part, sold individually. This impeller can be used as a replacement part in a snowblower. The impeller is what generates airflow in the blower.The impeller in a snowblower might have to be replaced if the impeller cannot serve its typical function while in use. The impeller could be punctured, warped, eroded, scraped, or otherwise damaged to the point of reduced efficacy or no functionality. If this occurs and the pressurized air cannot be effectively generated, the impeller should be removed and replaced by this genuine OEM replacement part for proper continued use of the snowblower. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This impeller is compatible with the following outdoor appliance brands: MTD, Craftsman, and Yard Machines.

This replacement part is an auger assembly. This is a genuine replacement part made by MTD. This auger assembly is used in appliances and machinery in parts that need to rotate in order for the engine to operate properly. If the auger is no longer rotating properly, it should be replaced. If the auger has become stripped down over time, it might not be able to stay attached to parts any longer. Ensure that the engine is off to prevent injury during the repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This power cord extension is a genuine MTD part, sold individually. This power cord extension can be used as a replacement part for a snowblower. This power cord extension lengthens the reach of the power cord so that the appliance can be used from a greater distance from its direct power source while it is plugged in. The power cord extension might have to be replaced at some point if the cord suffers damage that renders it beyond functionality. This could occur if the cord is frayed, if it gets wet, or if it is punctured, torn, scratched, or eroded to the point that it does not power on the snowblower when properly plugged in. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This power cord extension is compatible with the following outdoor appliance brands: MTD, Toro, Cub Cadet, Ryobi, Tecumseh, Lawn Boy, Huskee, Montgomery Wards, Bolens, Yard Man, Troy-Bilt, and Yard Machines.

This replacement part is drive cable intended for use in lawn equipment. This is a genuine replacement part made by MTD. Drive cables turn on the appliance. The user is able to use the drive cable to start the lawn mower and complete a job. The cable drive is important as it ensures that the machine is able to be turned off and shut down. A new drive cable might be needed if the user is not able to turn on the appliance. If the cable is damaged in any way it will also need to be replaced. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This auger cable is a genuine MTD part. It is designed to be a replacement part for use on snowblowers. On a snowblower, the auger cable, sometimes called the auger drive cable, is part of the machine's auger drive system. It connects the engagement lever and control lever. It is fairly common for auger cables to become worn, damaged, or broken over time and need to be replaced. Replacing the auger cable is a relatively simple repair. Remove the belt cover, disconnect the cable from the cable guide pulley, release the cable from the bracket, disconnect the cable completely, and then install the new auger cable. Be sure to take proper safety precautions and test the new auger cable before fully operating.This auger cable is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured for use with snowblowers made by Craftsman, MTD, and Yard Machines.

This replacement part is a key starter. This is a genuine replacement part made by MTD. This handy part is made to assist users in starting up and turning off riding lawn mowers. This works with the key itself to allow the user to control the engine during use.A new key starter might be needed if the current one is damaged. This can be due to an isolated incident or from normal wear and tear caused over time. If the key starter is damaged, it should be replaced as soon as possible so that the machine can return to working order. Be sure to refer to the proper user manual before attempting to replace this part. This part is also a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This part is a spark plug that is used on a number of lawn and garden power equipment. A spark plug is used as part of an internal combustion engine. The spark plug delivers the electric current from the ignition system to the engine.A new spark plug may be needed after normal wear and tear over a period of time. The operator of the outdoor power equipment may notice that the engine misfires or it is difficult to start. If this is the case, a new spark plug will be needed. Never perform care and maintenance on outdoor power equipment that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This spark plug is a genuine MTD part. It is sold individually. This particular spark plug is compatible with various outdoor power equipment that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This is a wheel assembly made specifically for use with snowblowers. The wheel on the snowblower adds support for the equipment and ensures it can easily be used and transported from one location to another. It is made of durable rubber and comes with both the tire and the metal rim. Both normal wear and tear and impact with other objects can cause damage to the wheel.If the snowblower is hard to move or the wheels seem wobbly or shaky, it could be the result of a damaged or broken wheel assembly. A visual inspection will indicate whether there is any clear damage to the component. If damage is present, for instance, if the wheel no longer spins, it will need to be replaced. Replace the wheel while the snowblower is on a stable surface and powered off. Remove the wheel and replace it with a new one.This wheel assembly is an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. This wheel assembly is compatible with various snowblowers made by Craftsman, MTD, and Yard Machines.

A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.

The shear pin’s purpose is to stop the engine when it is broken. If the machinery hits something hard, the shear pin will break. This prevents injuries that could be fatal. If something large or small becomes clogged or jammed in the auger, the shear pin is meant to snap in half, rendering the auger useless. This happens once the auger reaches a certain point in pressure load, which also prevents damage to the rest of your equipment. The auger part of your machinery cannot turn without a shear pin. Since the purpose of the shear pin is to break on impact, it's a good idea to have several of these on hand for quick replacements. There’s nothing like having your equipment break down in the middle of a job. Repair is simple. Just remove the broken shear pin, line up the auger’s holes, and insert your new shear pin. Use the cotter pin to secure your shear pin. This genuine OEM auger shear pin works in conjunction with small engine equipment with augers made by Craftsman, Cub Cadet, MTD, Troy-Built, Yard Machines, and Yard-Man. This part is sold individually. Consider also ordering an MTD Pin-Bow Tie Cotter or retaining clip.