Parts for Yard-Man 31AS63EE701 / 2013: .Quick Reference Parts

Fix your snowblower that won't clear snow on one side with this right-hand auger assembly. Moderately difficult repair for improved snow removal.

Snowblower won't throw snow or clears unevenly? This left hand auger assembly collects and feeds snow to the impeller. Moderate DIY repair.

Drive control cable for snowblowers. Connects drive control handle to engine mechanism. Replace if cable is frayed, broken, kinked, or detached.

Skid shoe kit for snow throwers. Mounts to the base housing to protect the auger from ground contact. Replace if worn, cracked, or missing.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

This power cord extension is a genuine MTD part, sold individually. This power cord extension can be used as a replacement part for a snowblower. This power cord extension lengthens the reach of the power cord so that the appliance can be used from a greater distance from its direct power source while it is plugged in. The power cord extension might have to be replaced at some point if the cord suffers damage that renders it beyond functionality. This could occur if the cord is frayed, if it gets wet, or if it is punctured, torn, scratched, or eroded to the point that it does not power on the snowblower when properly plugged in. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This power cord extension is compatible with the following outdoor appliance brands: MTD, Toro, Cub Cadet, Ryobi, Tecumseh, Lawn Boy, Huskee, Montgomery Wards, Bolens, Yard Man, Troy-Bilt, and Yard Machines.

Cleanout tool for snow throwers. Installs on the discharge chute housing. Replace if the original tool is lost, broken, or missing from your machine.

This is a replacement belt for self-propelled lawn and garden equipment. The belt is responsible for turning the axle that rotates the wheels when the self-propelled action is engaged. Over time, the belt can become worn with regular use. it should be replaced every season for optimal operation. There may also be instances where the belt breaks or becomes damaged and needs immediate replacement to avoid further damage. Without a working belt, the self-propelled function will not work. This genuine OEM v-belt is designed for use with a variety of 21-inch walk-behind lawn mowers and snow throwers. This belt is made of durable composite rubber material and reinforced for longer life with premium compression materials. Be careful when replacing belts and other tension parts as pinching and crushing injuries are common. Always allow the engine to cool and disengage the spark plug for safety.

Snowblower won't move forward or reverse? This friction wheel assembly transfers power from the engine to the drive system. Common repair for loss of traction.

Snowblower won't move forward or backward? The friction wheel assembly works with the friction disc to turn the drive axle and restore self-propulsion.

Speed select cable for snowblower ground drive system. Replace if your cable is deteriorated, damaged, detached, or missing from the control assembly.

Replacement skid shoe for snow blowers. Mounts to the side of the auger housing to protect surfaces and control clearing height. Replace when worn.

Scraper blade installs at the base of your snow blower housing to clear snow down to pavement. Replace if worn, cracked, or missing bolts are exposed.

Control cable that connects the auger handle to the engagement mechanism. Replace if cable is frayed, stretched, broken, or detached from the handle.

Replaces broken or sheared auger shear pin on snow throwers. This safety part snaps when auger hits obstacles to protect engine from damage.

Secures pins and shafts on lawn tractors and riding mowers. Replace if bent, missing, or worn. Bow-tie design inserts through pre-drilled holes.