Parts for Broan 153023: Range Hood Assembly Parts

This genuine replacement screw secures trim, panels, or components on compatible Broan ventilation products, restoring proper fit and reducing rattles or loose parts. Use when original fasteners are missing, stripped, or damaged. What it does:

• Fastens panels, grilles, or mounting brackets to maintain secure assembly
• Stops vibration-related noise caused by loose hardware
• Replaces missing or worn screws that prevent parts from seating correctly
• Helps restore original alignment and safe operation of covers and trim

• One replacement screw as shown

• Verify screw size and thread before installing; use matching hardware when replacing multiple fasteners
• Avoid over-tightening to prevent stripping or damaging mounting holes
• Disconnect power or follow appliance-specific safety procedures before accessing internal components
• Keep removed hardware organized so all originals are replaced during reassembly

This mounting bracket secures appliance components in place to restore proper alignment and stable support. It's a direct-fit replacement used where the original bracket is missing, bent, or broken to stop movement and rattling. What it does:

• Provides structural support for the appliance assembly to keep parts aligned and stable
• Replaces damaged or corroded brackets that can allow sagging or misalignment
• Helps eliminate rattling, vibration, and shifting during operation
• Matches OEM fit and attachment points when the original bracket fails

• Disconnect power to the appliance before beginning any repair.
• Verify correct bracket orientation and fastener locations against the appliance before tightening.
• Use proper-size fasteners and tools; do not overtighten to avoid stripping threads.

This is a replacement mounting nut that secures panels, brackets, or fasteners on ventilation appliances. It restores lost or damaged hardware so components stay firmly attached and reduce vibration or rattling. What it does:

• Secures panels, brackets, or fasteners to keep parts aligned and stable
• Prevents vibration and rattling caused by loose hardware
• Replaces stripped, corroded, or missing nuts that allow components to come loose
• Restores the original fastening point so associated hardware functions properly

• Disconnect power to the appliance before beginning any service
• Use the correct socket or wrench size to avoid rounding the nut
• Thread carefully and avoid cross-threading; do not overtighten
• If threads are damaged or hardware repeatedly loosens, inspect mating fastener and mounting hole

This is a replacement fastener screw used to secure panels and components on compatible Broan appliances. It restores a proper fit and keeps parts held firmly in place. What it does

• Replaces missing or stripped screws that allow panels or covers to rattle or sit unevenly
• Secures mounting brackets, trim pieces, or internal components so parts stay aligned
• Helps stop vibration noise caused by loose fasteners
• Simple hardware replacement to restore safe, stable assembly

• One replacement screw, as shown

• Use the correct screw location and thread engagement; do not force misaligned parts
• Hand-start the screw to avoid cross-threading, then tighten snugly — do not overtighten
• Disconnect power or follow appliance safety procedures before removing access panels
• Replace with this exact OEM screw for best fit

This replacement screw secures trim, panels, and internal components on compatible Broan appliances to restore a solid fit and reduce rattling or loose parts. Use it to replace missing or damaged fasteners and maintain safe operation. What it does:

• Secures mounting brackets, trim pieces, or internal assemblies
• Prevents panels from vibrating, rattling, or coming loose
• Restores proper alignment and fit of affected components
• Helps stop intermittent contact or movement that can cause noise

• Disconnect power to the appliance before servicing to reduce electrical and injury risk
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Keep removed hardware organized and reuse only matching OEM fasteners

This small replacement retainer secures a range-hood or vent component in place, restoring proper fit and preventing rattling or displacement. It's a simple, inexpensive part that helps keep panels, filters or grilles stable. What it does:

• Holds a grille, filter or small panel securely in its mounting location
• Keeps parts aligned to prevent gaps and air leakage
• Reduces vibration and rattling caused by loose fittings
• Helps prevent parts from falling or shifting during use

• High-level, trim-level replacement; typically installs with basic hand tools
• Disconnect power to the appliance before working near lights, fans or wiring
• Keep track of any screws or clips removed and note original orientation

This ballast transformer restores proper power regulation to the appliance lighting circuit so bulbs operate reliably and safely. Designed for use as a direct replacement to revive dim, flickering, or non-working range-hood/vent hood lamps. What it does:

• Regulates voltage to the appliance lighting system so lamps start and run consistently
• Helps eliminate dimming, flicker, or intermittent light failures tied to a faulty ballast
• Works with the hood's existing lamp sockets and wiring to restore normal lighting operation
• Supports service-level replacement where the original ballast has failed

• Service-replacement part — disconnect power to the appliance before starting work
• Handle carefully to avoid damage to terminals; secure mounting per original hardware

This mounting bracket secures ventilation or range hood components to the cabinet or chassis, restoring proper alignment and support for safe operation. Designed to match OEM fit and function for straightforward replacement. What it does:

• Provides structural support for hood or blower assemblies to prevent sagging or movement
• Secures components to cabinet framing or appliance chassis for correct alignment
• Helps stop vibration-related rattles and reduces wear on attached parts
• Restores stable mounting after damage or hardware failure

• One mounting bracket

• Turn power to the appliance off before beginning any work to avoid electrical shock
• Confirm bracket orientation and fastener locations match the original before tightening
• Use recommended fasteners and torque to avoid stripping or damaging mounting points
• Repair the cabinet/chassis before installing the new bracket

This replacement screw secures components on range hoods and ventilation assemblies, restoring proper fastener support for panels and brackets. A simple, direct replacement when original mounting hardware is missing or damaged. What it does:

• Fastens panels, brackets, or trim to the hood or blower assembly
• Restores secure mounting to reduce vibration or rattling
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps maintain safe operation by keeping covers and guards in place

• One replacement screw

• Use the matching driver size; do not overtighten to avoid stripping threads or cracking parts
• Verify screw length and thread engagement before final tightening
• Disconnect power to the appliance before servicing

This retaining clamp secures small components or ducting in compatible Broan ventilation assemblies to keep parts properly seated and reduce movement. It's a simple replacement for worn or missing clamps that cause loose fittings or rattling. What it does:

• Holds hoses, ducts, or internal components in place to prevent shifting during operation
• Restores a snug connection at a joint or mounting point to reduce air leaks and vibration noises
• Helps maintain proper alignment of parts so switches and seals function correctly
• Useful when an original clamp is corroded, broken, or missing

• Disconnect power to the appliance before starting any service
• Access the clamp through the hood or blower housing per the appliance service instructions
• Replace with the same orientation and seating; ensure the clamp fully engages the mating surfaces
• Check for proper seal after installation and tighten or adjust as needed

This replacement fan motor drives the blower that moves air through your ventilation system. Replace a failing motor to help restore proper airflow and reduce noise during operation. What it does:

• Spins the blower wheel/impeller to move air through the venting system
• Helps clear steam, smoke, and odors by maintaining consistent airflow
• Can address symptoms like a fan that won't start, just hums, runs slowly, or is unusually noisy
• Resolve overheating or a burning smell coming from the motor area

• 1 motor

• Disconnect power at the breaker before servicing
• Note wire locations and motor orientation for correct reassembly
• Ensure the blower wheel is secure and spins freely after installation
• Test run before final reassembly and check for vibration or rubbing

This is a replacement mounting nut that secures hardware and components on compatible Broan appliances, restoring proper fastener retention and preventing looseness. What it does

• Fastens and secures panels, brackets, or components in place
• Prevents vibration-related loosening that can cause rattling or misalignment
• Replaces missing or damaged thread hardware for safe, reliable attachment
• Used wherever the corresponding bolt/stud requires a matching nut to hold parts together

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct wrench or socket size to avoid stripping the nut or mating threads
• Thread the nut on by hand first, then snug with a tool; avoid overtightening
• Inspect mating bolt/stud and threads for damage; replace if stripped or corroded

The Range Hood Filter is an OEM part for Broan range hoods. It is a critical component that captures grease, smoke, and other airborne particles generated during cooking, helping to improve indoor air quality and prevent buildup within the range hood system. The dimensions of the filter are 6 1/4" x 23 5/8".

Causes of a bad range hood filter include normal wear and tear over time, as it becomes saturated with grease and particles, or physical damage from improper cleaning or handling.

Symptoms of a filter needing replacement include:

• Reduced airflow or suction power from the range hood
• Visible buildup or clogging of the filter material
• Increased cooking odors or smoke lingering in the kitchen area
• Difficulty in removing or cleaning the filter effectively

This OEM replacement filter is designed specifically for compatibility with Broan range hood models.