Parts for Broan 153604: Range Hood Assembly Parts

Replacement trim for your range hood. Installs around the perimeter or edge to provide a finished look. Order a new trim if yours is cracked or damaged.

Replace your range hood's damper flap if cracked, broken, or missing. This flap installs in the ductwork to control airflow and prevent backdrafts.

This mounting bracket secures appliance components in place to restore proper alignment and stable support. It's a direct-fit replacement used where the original bracket is missing, bent, or broken to stop movement and rattling. What it does:

• Provides structural support for the appliance assembly to keep parts aligned and stable
• Replaces damaged or corroded brackets that can allow sagging or misalignment
• Helps eliminate rattling, vibration, and shifting during operation
• Matches OEM fit and attachment points when the original bracket fails

• Disconnect power to the appliance before beginning any repair.
• Verify correct bracket orientation and fastener locations against the appliance before tightening.
• Use proper-size fasteners and tools; do not overtighten to avoid stripping threads.

This is a replacement mounting nut that secures panels, brackets, or fasteners on ventilation appliances. It restores lost or damaged hardware so components stay firmly attached and reduce vibration or rattling. What it does:

• Secures panels, brackets, or fasteners to keep parts aligned and stable
• Prevents vibration and rattling caused by loose hardware
• Replaces stripped, corroded, or missing nuts that allow components to come loose
• Restores the original fastening point so associated hardware functions properly

• Disconnect power to the appliance before beginning any service
• Use the correct socket or wrench size to avoid rounding the nut
• Thread carefully and avoid cross-threading; do not overtighten
• If threads are damaged or hardware repeatedly loosens, inspect mating fastener and mounting hole

Range hood not responding to buttons or lights not working? This control board manages all electronic functions. Moderate repair difficulty, 30-45 minutes.

This is a replacement fastener screw used to secure panels and components on compatible Broan appliances. It restores a proper fit and keeps parts held firmly in place. What it does

• Replaces missing or stripped screws that allow panels or covers to rattle or sit unevenly
• Secures mounting brackets, trim pieces, or internal components so parts stay aligned
• Helps stop vibration noise caused by loose fasteners
• Simple hardware replacement to restore safe, stable assembly

• One replacement screw, as shown

• Use the correct screw location and thread engagement; do not force misaligned parts
• Hand-start the screw to avoid cross-threading, then tighten snugly — do not overtighten
• Disconnect power or follow appliance safety procedures before removing access panels
• Replace with this exact OEM screw for best fit

Replacement mounting screw for fans and range hoods. Secures internal components and housing panels. Order if original screw is stripped, missing, or lost.

This replacement screw secures trim, panels, and internal components on compatible Broan appliances to restore a solid fit and reduce rattling or loose parts. Use it to replace missing or damaged fasteners and maintain safe operation. What it does:

• Secures mounting brackets, trim pieces, or internal assemblies
• Prevents panels from vibrating, rattling, or coming loose
• Restores proper alignment and fit of affected components
• Helps stop intermittent contact or movement that can cause noise

• Disconnect power to the appliance before servicing to reduce electrical and injury risk
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Keep removed hardware organized and reuse only matching OEM fasteners

Secures range hood panels, filters, or grilles in place to prevent rattling and displacement. Replace if clip is damaged, broken, or no longer holds firmly.

Replace your range hood lamp holder when bulbs won't stay secure or light fixtures fail. Restores proper bulb connection and illumination. Verify fit with your model number.

This ballast transformer restores proper power regulation to the appliance lighting circuit so bulbs operate reliably and safely. Designed for use as a direct replacement to revive dim, flickering, or non-working range-hood/vent hood lamps. What it does:

• Regulates voltage to the appliance lighting system so lamps start and run consistently
• Helps eliminate dimming, flicker, or intermittent light failures tied to a faulty ballast
• Works with the hood's existing lamp sockets and wiring to restore normal lighting operation
• Supports service-level replacement where the original ballast has failed

• Service-replacement part — disconnect power to the appliance before starting work
• Handle carefully to avoid damage to terminals; secure mounting per original hardware

Replace your range hood light harness if lights flicker or won't turn on. This wiring assembly connects the light socket to power. Verify fit with your model.

Replacement cover panel for range hood exterior. Installs on front or side housing. Order when original is cracked, dented, discolored, or missing.

This replacement screw secures components on range hoods and ventilation assemblies, restoring proper fastener support for panels and brackets. A simple, direct replacement when original mounting hardware is missing or damaged. What it does:

• Fastens panels, brackets, or trim to the hood or blower assembly
• Restores secure mounting to reduce vibration or rattling
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps maintain safe operation by keeping covers and guards in place

• One replacement screw

• Use the matching driver size; do not overtighten to avoid stripping threads or cracking parts
• Verify screw length and thread engagement before final tightening
• Disconnect power to the appliance before servicing

This retaining clamp secures small components or ducting in compatible Broan ventilation assemblies to keep parts properly seated and reduce movement. It's a simple replacement for worn or missing clamps that cause loose fittings or rattling. What it does:

• Holds hoses, ducts, or internal components in place to prevent shifting during operation
• Restores a snug connection at a joint or mounting point to reduce air leaks and vibration noises
• Helps maintain proper alignment of parts so switches and seals function correctly
• Useful when an original clamp is corroded, broken, or missing

• Disconnect power to the appliance before starting any service
• Access the clamp through the hood or blower housing per the appliance service instructions
• Replace with the same orientation and seating; ensure the clamp fully engages the mating surfaces
• Check for proper seal after installation and tighten or adjust as needed

Rubber bushing that reduces vibration and noise in range hood assemblies. Replace if worn, cracked, or missing to restore quiet operation and stability.

Replace a range hood motor that won't spin or runs loud. Restores proper airflow and ventilation. Moderate DIY repair, typically 1-2 hours with cleaning.

This is a replacement mounting nut that secures hardware and components on compatible Broan appliances, restoring proper fastener retention and preventing looseness. What it does

• Fastens and secures panels, brackets, or components in place
• Prevents vibration-related loosening that can cause rattling or misalignment
• Replaces missing or damaged thread hardware for safe, reliable attachment
• Used wherever the corresponding bolt/stud requires a matching nut to hold parts together

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct wrench or socket size to avoid stripping the nut or mating threads
• Thread the nut on by hand first, then snug with a tool; avoid overtightening
• Inspect mating bolt/stud and threads for damage; replace if stripped or corroded

Replacement spring for range hood internal mechanisms. Restores proper tension and function when original spring is broken, weakened, or missing.

Captures grease, smoke, and airborne particles from cooking. Replace when visibly dirty or clogged to maintain air quality and prevent buildup. Verify fit with your model number.

Replace your range hood's cracked, discolored, or missing light lens cover. This transparent lens protects the bulb and directs light downward over your cooktop.