Parts for Broan E66136BL: Range Hood Assembly Parts

This electric control is the main electronic board that runs your range hood. Replacing a failed control restores reliable fan speed and light operation so the hood responds properly to the user buttons or touch controls.

• Regulates power to the blower motor and hood lights based on user input
• Switches between available fan speeds per model design
• Interprets keypad commands for on/off and lighting functions
• Common failure symptoms: no fan or lights, only one speed works, unresponsive buttons, or intermittent operation

• Disconnect power at the breaker and verify no voltage before servicing
• Handle the board by the edges and use ESD precautions
• Photograph wiring; move connectors one at a time to matching terminals
• Reuse original mounting hardware and test operation before final reassembly

This blower motor powers the fan that clears smoke, steam and cooking odors from a range hood, restoring proper ventilation and airflow. Designed as a direct replacement to get the hood fan running smoothly again. What it does

• Spins the hood fan to move air through the ventilation system
• Restores normal airflow when the fan is weak or slow
• Stops humming or intermittent operation caused by a failing motor
• Reduces overheating and unusual noises from the hood assembly

• Disconnect power to the appliance before starting any work.
• Access typically requires removing the hood grille or blower housing—keep fasteners organized.
• Verify blower rotation and wiring match the original motor before final assembly.

This lamp socket is the replacement bulb holder that completes the electrical connection for a range-hood or ventilation light assembly, restoring reliable illumination when a socket is worn or damaged. What it does:

• Holds and secures the light bulb while providing the electrical contact needed for the lamp to operate.
• Replaces a cracked, loose, or burned socket that can cause intermittent lighting or a bulb that won't stay seated.
• Helps resolve symptoms such as flickering lights, no light output even with a good bulb, or visible socket damage.
• Re-establishes a safe connection so the light can operate at normal brightness when the fixture and bulb are functional.

• Always disconnect power to the appliance at the breaker or unplug before starting work.
• Remove the bulb and any housing or grille to access the socket; replace the socket and secure wiring connections per the appliance's wiring layout.
• Use only compatible bulbs and follow the appliance manufacturer's instructions; if wiring is damaged or corroded,
• After installation, restore power and test the light; if problems persist, verify wiring continuity and fixture compatibility.

This trim ring is the finished outer ring that fits around a ventilation or range hood opening to restore a clean, sealed look and cover the gap between the housing and ceiling or cabinet. It provides a simple cosmetic repair and helps hold the hood trim in place. What it does:

• Covers and finishes the visible edge of the vent or hood opening for a neat appearance
• Conceals cut edges and mounting gaps for a professional-looking installation
• Helps stabilize and align the outer grille/trim to reduce rattling or misalignment
• Restores the original exterior look after removing or replacing internal components

• One trim ring

• Turn off power to the appliance at the breaker before working on the hood or vent
• Handle edges carefully; trim pieces can have sharp edges
• Installation generally requires removing the existing trim and securing the ring with the original fasteners; consult your model's installation instructions

This LED light bulb restores bright, dependable lighting in your range hood so you can clearly see the cooktop while cooking. It replaces the original lamp specified by the manufacturer for models that call for this part number. What it does:

• Provides task lighting from the hood's light socket
• Replaces a bulb that is burnt out, dim, or flickering
• Helps maintain clear visibility over the cooking surface
• Common symptoms include the light not turning on or intermittent operation

• LED light bulb

• Disconnect power to the hood at the breaker before servicing
• Allow the lamp to cool completely before handling
• Access the light from the underside; remove any lens or retaining ring as designed
• Remove the old bulb, seat the new bulb fully, and test before reinstalling the lens/trim

This replacement filter keeps your hood capturing cooking smoke and grease efficiently, helping maintain clear airflow and a cleaner kitchen. Swap a clogged or damaged filter to restore performance and protect the blower from buildup. What it does:

• Screens airborne grease and cooking particulates as air passes through the hood
• Helps maintain proper airflow and reduce residue on internal components
• Protects the blower and ducting from excessive grease accumulation
• Replace if saturated, warped, corroded, torn, or no longer seating securely
• Common symptoms: reduced capture, lingering smoke/odors, visible grease on surfaces, rattling or loose filter

• One filter

• Disconnect power to the hood before servicing and allow surfaces to cool
• Open the filter latch or tabs and remove the old filter
• Install the new filter in the same orientation; ensure it seats and latches fully
• Run the fan briefly to check for vibration and proper airflow

This name plate is the identification label that attaches to the appliance housing to display model, serial, and regulatory information—keeps factory identification visible and legible for service or parts replacement. What it does:

• Provides the unit's model and serial number information for identification during repairs
• Replaces faded, damaged, or missing labels that hinder proper part matching
• Helps technicians and owners verify ratings and regulatory markings
• Restores a factory appearance where the original label is worn or peeled

• Disconnect power to the appliance before attempting any service
• Typically adheres or fastens to an exterior panel; remove old label and surface-clean before installing
• Use appropriate fasteners or adhesive as originally supplied; do not cover ventilation openings