Parts for Broan RM659004: Range Hood Parts

This capacitor helps start and keep the blower/fan motor running smoothly in your range hood or ventilation unit. Replacing a weak or failed capacitor can restore proper fan performance and reduce humming or slow-start issues. What it does

• Provides the phase shift needed for a PSC fan motor to start and run correctly
• Common symptoms of failure: fan won't start, only hums, runs slowly, or starts intermittently
• Physical clues include a swollen case or heat-damaged terminals

• 1 capacitor

• Disconnect power at the breaker before servicing; capacitors can retain a charge
• Safely discharge the old capacitor and avoid shorting the terminals
• Note wire positions/take a photo and transfer wiring to the new part one-for-one
• Mount securely and keep leads clear of sharp edges and hot surfaces; test operation after reassembly

This control box is the electrical control module that manages a range hood's fan and lighting functions, restoring reliable power and speed control for ventilation performance. What it does:

• Provides the main electronic control for fan blower speeds and integrated lighting
• Receives inputs from hood switches or remote and switches power to motors and lights
• Replaces a failed or intermittent control module that causes unresponsive or erratic blower/light operation
• Prevents electrical faults caused by damaged or burned-out control circuitry

• Disconnect all power to the appliance before starting any work
• Replace only with the exact part number for your unit
• Follow manufacturer wiring diagrams and secure all connections; use proper connectors/insulation

This blower wheel spins inside the vent blower assembly to move air through the hood or ventilation system, restoring proper airflow and helping clear smoke and cooking odors. Fits applications that use a single replacement wheel. What it does:

• Replaces worn or damaged wheel blades that reduce airflow
• Restores proper ventilation when airflow is weak or uneven
• Can reduce vibration or scraping noises caused by a bent or broken wheel
• Works with the blower motor to circulate air through the ductwork and filters

• Disconnect power to the appliance before beginning work.
• Handle with care — blower housings and mounting screws may have sharp edges.
• Verify wheel orientation and secure mounting to the motor shaft per manufacturer alignment marks.

Replacement mounting washer that secures fasteners and maintains proper spacing on blower, motor, and housing assemblies. Restores alignment and helps reduce vibration and rattling caused by loose or missing hardware. What it does:

• Provides a smooth bearing surface under a screw or nut to distribute load and prevent pull-through.
• Keeps mounting fasteners aligned and helps maintain correct spacing between components.
• Helps reduce vibration and noise from loose or worn hardware when installed properly.
• Useful when replacing corroded or damaged fastening hardware during routine repairs.

• Disconnect power to the appliance before beginning any repair.
• Match the washer to the original part (size and thickness) and install between the fastener head and the mounting surface.
• Do not overtighten fasteners—tighten just enough to secure the part and avoid crushing the washer.
• Replace any rusted or damaged screws, nuts, or complementary hardware for a reliable repair.

This name plate is the identification label that attaches to the appliance housing to display model, serial, and regulatory information—keeps factory identification visible and legible for service or parts replacement. What it does:

• Provides the unit's model and serial number information for identification during repairs
• Replaces faded, damaged, or missing labels that hinder proper part matching
• Helps technicians and owners verify ratings and regulatory markings
• Restores a factory appearance where the original label is worn or peeled

• Disconnect power to the appliance before attempting any service
• Typically adheres or fastens to an exterior panel; remove old label and surface-clean before installing
• Use appropriate fasteners or adhesive as originally supplied; do not cover ventilation openings

This mounting bracket secures and supports range-hood components, helping keep the hood or vent assembly aligned and stable for reliable operation. It replaces worn or damaged support hardware to restore proper fit. What it does:

• Provides structural support to hood or vent assemblies so panels and components stay aligned
• Helps stop rattling or movement caused by loose or damaged mounting hardware
• Restores secure attachment points for internal parts and external panels
• Works as a direct-fit service part when the original bracket is bent, broken, or missing

• One mounting bracket

• Disconnect power to the appliance before starting any repair
• Typical installation requires basic hand tools; follow the appliance's service manual for exact steps
• Use the correct fasteners and torque per the manufacturer; replace any damaged clips or screws

This reflector directs and focuses the range hood light for brighter, more even illumination while protecting the lamp assembly from grease and heat. It restores proper light distribution so the cooktop is easier to see. What it does:

• Directs and focuses light from the hood lamp for improved task lighting
• Shields the bulb and lamp housing from grease and debris
• Helps reduce uneven or dim lighting caused by a damaged or missing reflector
• Fits into the hood light assembly to maintain intended beam pattern

• Always disconnect power to the appliance before starting any work
• Remove the lamp and lens/cover per your model instructions before replacing the reflector
• Handle carefully to avoid bending or scratching the reflector surface
• After installation, restore power and test the light to ensure proper fit and function

Replacement transformer that restores power to low-voltage components in compatible Broan ventilation appliances, helping lights and control circuits operate correctly. Install the correct PN match to return normal lighting and control function. What it does

• Converts incoming power to the voltage required by low-voltage lights and control circuits in compatible Broan ventilation products.
• Replaces failed or damaged transformers that cause no power, intermittent operation, or flickering lights.
• Stops symptoms such as lights that won't turn on, intermittent lighting, or unresponsive control circuits when the transformer is the fault.
• Fits as a direct replacement when matching the appliance model and part number.

• Always disconnect electrical power at the breaker before inspecting or replacing electrical parts.
• Match wiring colors and connector types; secure all connections and grounding per OEM instructions.

This push button is the user control used to operate a range hood or ventilation control panel. It restores tactile control so fan speeds, lights, or other front-panel functions respond reliably. What it does:

• Replaces a worn, cracked, or non-returning control button on the appliance control panel
• Allows the user to engage and release front-panel switches for fan, light, or speed selection
• Helps stop intermittent or unresponsive button presses that prevent normal operation
• Matches the OEM fit and mounting style for direct panel replacement when correct part number is used

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access the control panel per your model's service instructions; remove bezel or trim as needed
• Replace the button by snapping it into place or securing per the original mounting; avoid forcing

This factory hardware replaces worn or missing rings used in select Broan ventilation products. It helps secure and space components so they fit correctly and run more quietly, reducing looseness and vibration from fatigued hardware. What it does:

• Retains and spaces mating parts to prevent movement during operation
• Helps maintain proper alignment for smooth, quiet performance
• Restores a snug, rattle-free fit when originals are bent, worn, or missing
• Common signs it's needed: loose or rattling parts, poor fitment, visible damage, or a missing ring during service

• Replacement rings only

• Disconnect power at the breaker before servicing
• Note the original orientation and order of hardware; take photos for reference
• Use appropriate pliers (snap-ring/needle-nose); wear eye protection—small rings can spring free
• Inspect adjacent parts for wear and replace any damaged components to ensure a secure fit