Parts for Broan RP136BL: Range Hood Parts

This replacement bushing supports the motor shaft and keeps the blower wheel running smoothly. It helps reduce shaft play and prevents motor rubbing that can cause noise or premature wear. What it does:

• Centers and supports the motor shaft to maintain proper blower alignment
• Reduces friction and noise caused by a worn or loose shaft support
• Helps prevent rubbing or scraping that can reduce airflow or strain the motor
• Common symptom fix: noisy or wobbling fan, intermittent rubbing sounds, or loss of smooth rotation

• Disconnect power to the appliance before starting any work
• Access the blower/motor assembly; replacement usually requires removing the fan housing and motor
• Inspect the shaft and housing for wear or damage before installing the new bushing

This charcoal odor-absorbing filter replaces a used carbon filter in recirculating range hoods to help reduce cooking smells for fresher kitchen air. It fits models that use a disposable carbon filter cartridge. What it does:

• Adsorbs and reduces common cooking odors and airborne smells using activated carbon
• Designed for recirculating or ductless range hood configurations that rely on carbon filtration
• Helps maintain fresher kitchen air between regular filter replacements
• Complements grease filters by targeting odors rather than grease capture

• Follow the hood manufacturer's instructions; ensure power is off and hood is cool before replacing filter
• Typically installs behind or beneath the grease filter—remove grease filter first if required
• Disposable—do not attempt to wash or regenerate unless manufacturer explicitly states it is washable
• Replace on the interval recommended by the appliance manufacturer or sooner if odors persist

This is a replacement mounting nut that secures hardware and components on compatible Broan appliances, restoring proper fastener retention and preventing looseness. What it does

• Fastens and secures panels, brackets, or components in place
• Prevents vibration-related loosening that can cause rattling or misalignment
• Replaces missing or damaged thread hardware for safe, reliable attachment
• Used wherever the corresponding bolt/stud requires a matching nut to hold parts together

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct wrench or socket size to avoid stripping the nut or mating threads
• Thread the nut on by hand first, then snug with a tool; avoid overtightening
• Inspect mating bolt/stud and threads for damage; replace if stripped or corroded

This wheel is the blower fan replacement that restores proper airflow in compatible Broan ventilation units. It helps re-establish efficient exhaust and reduces noise or vibration caused by a damaged or worn wheel. What it does:

• Spins on the motor shaft to move air through the vent or range hood
• Restores airflow when a cracked, clogged, or warped wheel reduces performance
• Helps reduce rubbing noises and vibration from a bent or loose wheel
• Supports normal ventilation and odor removal when operating correctly

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the wheel carefully; edges and nearby sheet metal can be sharp
• Inspect the motor shaft, set screw, and housing for damage before installing
• Tighten mounting hardware to OEM torque and verify the wheel spins freely without rubbing

This is a replacement mounting nut used to secure components and hardware in range hoods and ventilation assemblies. It provides a simple, reliable fastener to hold studs, bolts, or threaded posts in place. What it does:

• Secures panels, mounting brackets, or trim pieces to threaded studs or bolts
• Helps keep components aligned and prevents parts from slipping loose
• Can be used where a small, standard nut is required for assembly or repair
• Commonly replaced when stripped, corroded, or missing to restore safe attachment

• Disconnect power to the appliance and ensure the area is safe before servicing
• Match nut to the correct stud/bolt thread size and pitch before installation
• Tighten with the appropriately sized wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit

This replacement knob restores a clean look and reliable control of your unit's settings. It fits onto the control shaft to give you a secure, easy-to-grip dial when the original knob is cracked, loose, or missing.

• Press-fits onto a control shaft to operate the switch or speed control
• Provides a secure grip for selecting settings as intended
• Replaces damaged, cracked, or missing knobs
• Helps address slipping, free-spinning, or hard-to-turn controls

• Disconnect power to the appliance before servicing
• Pull the old knob straight off; avoid prying against the panel to prevent damage
• Align the flat/D-shaped insert with the shaft and press on until fully seated
• Restore power and test operation

Replacement rocker switch that restores manual control of the range-hood fan or light, providing straightforward on/off operation. Use this switch to replace worn, stuck, or non-responsive controls for safer, more reliable operation. What it does

• Replaces a failed or damaged rocker-style on/off control so the fan or light will operate when switched.
• Use when the hood fan or light won't turn on, the switch feels loose or sticks, or the control works intermittently.
• Fits into the original switch location and connects to existing wiring/quick-disconnect terminals.
• Restores simple user control without replacing the entire hood control assembly.

• One rocker switch.

• Always disconnect power at the breaker before servicing electrical components.
• Turn off power, label or photo the wiring for reference, then remove the old switch and attach the replacement to matching terminals.
• Secure the switch and restore power; test fan and light operation.

This is a replacement mounting nut used to secure components and hardware in range hoods and ventilation assemblies. It provides a simple, reliable fastener to hold studs, bolts, or threaded posts in place. What it does:

• Secures panels, mounting brackets, or trim pieces to threaded studs or bolts
• Helps keep components aligned and prevents parts from slipping loose
• Can be used where a small, standard nut is required for assembly or repair
• Commonly replaced when stripped, corroded, or missing to restore safe attachment

• Disconnect power to the appliance and ensure the area is safe before servicing
• Match nut to the correct stud/bolt thread size and pitch before installation
• Tighten with the appropriately sized wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit