Parts for Broan RP136WW: Range Hood Parts

This replacement bushing supports the motor shaft and keeps the blower wheel running smoothly. It helps reduce shaft play and prevents motor rubbing that can cause noise or premature wear. What it does:

• Centers and supports the motor shaft to maintain proper blower alignment
• Reduces friction and noise caused by a worn or loose shaft support
• Helps prevent rubbing or scraping that can reduce airflow or strain the motor
• Common symptom fix: noisy or wobbling fan, intermittent rubbing sounds, or loss of smooth rotation

• Disconnect power to the appliance before starting any work
• Access the blower/motor assembly; replacement usually requires removing the fan housing and motor
• Inspect the shaft and housing for wear or damage before installing the new bushing

This electronic control board replaces a failed or unresponsive range hood control and restores fan and light operation. It provides the appliance's main control logic so user commands are registered and executed reliably. What it does:

• Receives input from the range hood's push-buttons or touchpad and controls fan speeds and lighting
• Manages on/off functions and timing features, helping resolve intermittent or non-responsive controls
• Replaces damaged or malfunctioning control circuitry that can cause no power to fan or lights
• Helps correct erratic operation when buttons respond inconsistently or functions work only sometimes

• One electronic control board as shown

• Disconnect power at the breaker before starting any repair to avoid electric shock
• Installation typically requires removing the hood cover to access and replace the board; handle circuit boards carefully to avoid static damage
• Verify connector orientation and secure all wiring; do not force connectors into place

This charcoal odor-absorbing filter replaces a used carbon filter in recirculating range hoods to help reduce cooking smells for fresher kitchen air. It fits models that use a disposable carbon filter cartridge. What it does:

• Adsorbs and reduces common cooking odors and airborne smells using activated carbon
• Designed for recirculating or ductless range hood configurations that rely on carbon filtration
• Helps maintain fresher kitchen air between regular filter replacements
• Complements grease filters by targeting odors rather than grease capture

• Follow the hood manufacturer's instructions; ensure power is off and hood is cool before replacing filter
• Typically installs behind or beneath the grease filter—remove grease filter first if required
• Disposable—do not attempt to wash or regenerate unless manufacturer explicitly states it is washable
• Replace on the interval recommended by the appliance manufacturer or sooner if odors persist

This is a replacement mounting nut that secures hardware and components on compatible Broan appliances, restoring proper fastener retention and preventing looseness. What it does

• Fastens and secures panels, brackets, or components in place
• Prevents vibration-related loosening that can cause rattling or misalignment
• Replaces missing or damaged thread hardware for safe, reliable attachment
• Used wherever the corresponding bolt/stud requires a matching nut to hold parts together

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct wrench or socket size to avoid stripping the nut or mating threads
• Thread the nut on by hand first, then snug with a tool; avoid overtightening
• Inspect mating bolt/stud and threads for damage; replace if stripped or corroded

This wheel is the blower fan replacement that restores proper airflow in compatible Broan ventilation units. It helps re-establish efficient exhaust and reduces noise or vibration caused by a damaged or worn wheel. What it does:

• Spins on the motor shaft to move air through the vent or range hood
• Restores airflow when a cracked, clogged, or warped wheel reduces performance
• Helps reduce rubbing noises and vibration from a bent or loose wheel
• Supports normal ventilation and odor removal when operating correctly

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the wheel carefully; edges and nearby sheet metal can be sharp
• Inspect the motor shaft, set screw, and housing for damage before installing
• Tighten mounting hardware to OEM torque and verify the wheel spins freely without rubbing

This is a replacement mounting nut used to secure components and hardware in range hoods and ventilation assemblies. It provides a simple, reliable fastener to hold studs, bolts, or threaded posts in place. What it does:

• Secures panels, mounting brackets, or trim pieces to threaded studs or bolts
• Helps keep components aligned and prevents parts from slipping loose
• Can be used where a small, standard nut is required for assembly or repair
• Commonly replaced when stripped, corroded, or missing to restore safe attachment

• Disconnect power to the appliance and ensure the area is safe before servicing
• Match nut to the correct stud/bolt thread size and pitch before installation
• Tighten with the appropriately sized wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit

This replacement control knob restores a secure, easy grip on the control shaft so you can adjust settings smoothly again. Use it to replace a worn, cracked, or missing knob and regain precise control. What it does:

• Attaches to the control shaft to operate a switch or variable control
• Provides a reliable handhold for adjusting settings
• Helps resolve issues like a cracked knob, loose fit, or knob that falls off
• Addresses difficulty turning the control or the control not responding when the knob is rotated

• 1 knob

• Disconnect power at the breaker or unplug the unit before servicing
• Pull the old knob straight off; if tight, gently pry while protecting the surface (loosen any set screw first if present)
• Align the flat (D) or splined shaft and press the new knob on fully
• Restore power and test operation

This switch assembly restores dependable control of your range hood or ventilation unit, helping resolve unresponsive or intermittent controls so the appliance turns on, off, and changes settings as expected.

• Provides the user interface to turn functions on/off and change settings
• Failure signs include no response on certain settings, intermittent operation, or a stuck/loose actuator
• Heat, moisture, and normal wear can degrade internal switch contacts over time
• Replacing the switch restores smooth, consistent operation

• Disconnect power at the breaker before servicing
• Access the control area and photograph wiring to document positions
• Move wires one at a time to the new switch; ensure tight, fully seated connections
• Reassemble and test all functions before finalizing

This is a replacement mounting nut used to secure components and hardware in range hoods and ventilation assemblies. It provides a simple, reliable fastener to hold studs, bolts, or threaded posts in place. What it does:

• Secures panels, mounting brackets, or trim pieces to threaded studs or bolts
• Helps keep components aligned and prevents parts from slipping loose
• Can be used where a small, standard nut is required for assembly or repair
• Commonly replaced when stripped, corroded, or missing to restore safe attachment

• Disconnect power to the appliance and ensure the area is safe before servicing
• Match nut to the correct stud/bolt thread size and pitch before installation
• Tighten with the appropriately sized wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit