Parts for Ge JV338H1CC: 01 - Range Hood Parts

This lamp socket holds the appliance light bulb and provides the electrical connection it needs, restoring reliable, steady lighting so you can see clearly during cooking and routine checks.

• Provides secure electrical contact to power the light bulb
• Holds the bulb firmly in the light assembly
• Replaces heat-damaged or brittle sockets that cause flickering or no light
• Common symptoms: light won't turn on with a known-good bulb, flickers, bulb won't seat, or visible charring/melting at the socket

• Disconnect power at the breaker and allow the appliance to cool before service
• Wear cut-resistant gloves; nearby metal and glass edges can be sharp
• Move wires one at a time from the old socket to the new to maintain correct connections
• Install a bulb that matches your model's specified type and wattage before restoring power

This replacement motor restores the rotation your appliance depends on for proper operation. Installing a new motor eliminates seized or noisy operation and brings back smooth movement and airflow so the unit cools and cooks the way it should.

• Provides the turning force to spin the connected assembly as designed
• Maintains proper airflow or internal movement for stable performance
• Common failure signs: no rotation, intermittent movement, loud humming/grinding, overheating or poor venting
• Helps prevent nuisance shutdowns and uneven results caused by a weak or seized motor

• Disconnect power at the breaker before servicing; if working on a microwave, discharge the high-voltage capacitor
• Transfer any brackets, grommets, and wiring to the new motor in the same orientation
• Ensure the shaft spins freely and nothing rubs before reassembly
• Test operation before fully reinstalling covers

This motor bracket secures the appliance motor to the cabinet, keeping the motor aligned and stable for reliable operation. It's a direct-fit replacement that restores proper motor support and reduces noise from misalignment. What it does:

• Supports and positions the motor so the shaft and pulleys line up correctly
• Prevents excess motor movement that can cause vibration or rubbing noises
• Helps maintain proper belt/pulley tension for effective power transfer
• Restores secure motor mounting after damage or corrosion

• Follow the appliance service manual for removal and reassembly; secure all mounting hardware to the specified torque.
• Disconnect power before starting work to avoid electrical shock.
• Inspect surrounding mounting holes and fasteners; replace any damaged screws or hardware.
• Check belts, pulleys, and motor mounts for related damage.

This Range Hood Fan Blade is an OEM part for GE range hoods. It is a vital component that helps circulate the air and remove smoke, odors, and cooking fumes from your kitchen. The fan blade is designed to fit securely onto the range hood motor shaft, rotating rapidly to create airflow within the hood. 

Causes of a faulty fan blade can include wear and tear over time, damage due to accumulated grease or debris, or physical impact. These factors can result in a loose or unbalanced fan blade, reduced airflow, or noisy operation of the range hood.

Symptoms of a bad fan blade may include:

• Decreased airflow or ventilation efficiency
• Excessive noise or vibration during operation
• Visible damage or deformation of the fan blade

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fan clip secures the ventilation fan blade or blower wheel to the motor shaft, preventing looseness and vibration. Replacing a worn or missing clip restores a tight fit so the fan runs smoothly and maintains proper airflow.

• Holds the fan blade/blower wheel firmly on the motor shaft
• Helps reduce wobble, scraping, or rattling noises during fan operation
• Can resolve a loose or non-spinning fan caused by a failed/missing retainer
• Supports proper airflow and cooling performance

• Disconnect power and allow the appliance to cool before servicing
• Access the fan/blower assembly and note the original clip's orientation
• Seat the clip fully in the shaft groove; ensure the wheel is secure and spins freely
• Wear cut-resistant gloves and use caution around sharp metal edges

The Grease Filter is an OEM part for GE range hoods. It is designed to trap grease and other particles from the air that circulates through your cooking appliances, preventing buildup within the ventilation system. 

Causes of a bad Grease Filter can include saturation from accumulated grease and debris, which can limit its effectiveness and airflow. Over time, the filter can also become damaged or corroded, reducing its ability to capture and hold grease particles.

Symptoms of a bad Grease Filter include:

• Visible grease buildup on the filter surface.
• Reduced effectiveness in venting smoke or cooking odors.
• Increased smoke and odors lingering in the kitchen during and after cooking.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This retaining nut is a small threaded fastener that secures appliance components in place, restoring stable mounting and preventing vibration or movement. It's a simple replacement for worn or missing nuts on compatible GE appliances. What it does:

• Secures elements, brackets or terminals to prevent loosening during use
• Stops rattling or movement caused by a missing or stripped nut
• Helps maintain proper alignment for heating and electrical connections
• Commonly used where a compact, threaded retaining nut is required

• One retaining nut

• Inspect mating threads and surrounding hardware; replace damaged studs or bolts as needed
• Hand-start the nut to avoid cross-threading, then tighten with the appropriate tool
• Disconnect power to the appliance before working near electrical components

This fan control switch operates the fan motor to regulate blower speed and restore proper airflow in affected appliances. A direct-fit replacement designed to return fan control without reworking wiring or mounting. What it does:

• Selects and maintains fan speed for proper airflow and cooling
• Restores fan operation when the blower won't run or only runs at one speed
• Helps resolve noisy, intermittent, or non-responsive fan behavior
• Works as the user-facing control that communicates speed settings to the fan motor

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools; avoid forcing connectors or terminals

This lamp switch controls the oven interior light, letting you turn the light on or off from the range/oven control panel. Replaces a worn or non-working light switch to restore oven lighting control. What it does:

• Acts as the control for the oven interior lamp when you press the switch
• Commonly used when the light won't turn on, flickers, or the switch feels loose
• Provides a direct electrical connection between the oven lighting circuit and the lamp
• Matches OEM fit and function for compatible GE ranges and ovens

• 1 lamp switch

• Disconnect power to the appliance before servicing to avoid shock
• Basic wiring and panel access are required; keep track of mounting screws and wire locations
• Only install parts intended for your appliance model

This damper controls airflow between compartments to help maintain consistent temperatures and efficient cooling. Replaces a worn or broken damper to restore proper air circulation and reduce temperature imbalances. What it does:

• Opens and closes to regulate airflow between refrigerator and freezer compartments
• Helps maintain set temperatures by directing cooled air where needed
• Faulty dampers can cause uneven cooling, warm spots, or overworking compressor
• Reduces noise from loose or broken damper flaps when operating

• One damper assembly

• Disconnect power before starting any repair to avoid shock
• Handle the damper flap and linkage carefully; plastic parts can be fragile
• May require removal of interior panels or shelves for access—keep track of fasteners

This replacement collar is a small support piece that centers and stabilizes a rotating shaft or drum assembly, helping reduce friction and noise for smoother operation. It restores proper alignment where a worn collar causes rubbing or wobble. What it does:

• Centers and supports the rotating shaft or drum to maintain correct alignment
• Reduces metal-on-metal contact that can cause noise, rubbing, or scraping
• Helps prevent excess wear on bearings, seals, and adjacent components
• Restores smoother rotation when a damaged collar allows wobble or vibration

• Disconnect power before servicing to avoid shock or injury
• Access may require removing panels or the drum/shaft assembly
• Install in the same orientation and seating as the original; inspect adjacent bearings, seals, and mounts