Parts for Ge JV935D1CC: 01 - Range Hood Parts

This is a filter clip used on range hoods. It is sometimes referred to as a range hood clip or range hood clamp. There is a filter located inside the range hood that is used to filter out smells and small particles during the cooking process. The filter is held in place by the filter clip. Accidental damage, wear and tear, or misuse may cause the filter clip to fall out or no longer be capable of holding the filter. If the filter clip is missing or broken, a replacement part is required.A visual inspection will determine if the filter clip is damaged or missing. Replacing the clip filter is an easy process. Remove the old filter clip if there is one present. Line up the new filter clip in the same position and snap it into place. Wear gloves for protection. There are no special tools required to make this repair.This is an authentic OEM replacement part. It is sold as an individual unit. The filter clip is made of durable, high-quality materials. The replacement part can be installed in several different models of range appliances. It is compatible with machines produced by General Electric, Hotpoint, and RCA.

Note: This filter is approximately 12" x 14". (Qty of one)

This Grease Filter is an OEM part for GE range hoods. As a key filtration component, this rectangular filter works to capture cooking emissions like grease, smoke and odors above the cooktop. It prevents these contaminants from recirculating back into the kitchen or home.

Causes of a bad filter can include excessive use over time, washing with improper cleaning solutions, or damage during removal/installation.

Symptoms of a bad filter include:

• Reduced airflow and suction from the range hood
• Grease or smoke escaping from the hood despite ventilation usage
• Unpleasant cooking smells lingering in the kitchen

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Range Hood Lamp Assembly is an OEM part for GE range hoods. It provides essential illumination for safe and effective kitchen ventilation. This lamp assembly features energy-efficient LED bulbs designed for high visibility with a rated lifespan. 

Causes of a faulty lamp assembly can include normal aging of LED components over time. Impacts or shaking may also loosen internal connections.

Symptoms include: 

• Dimming or unlit bulbs that no longer illuminate the hood area
• Flickering or intermittent light operation
• Buzzing or humming sounds from within the fixture

This OEM GE assembly is also compatible with some Hotpoint and RCA models.

This halogen light bulb restores bright, reliable illumination inside your appliance, making it easier to check food and read controls. Replace a burned-out or broken lamp to bring back safe, convenient visibility while cooking.

• Provides bright lighting for the appliance cavity or work area
• Direct replacement for a failed, flickering, or shattered bulb
• Helps you monitor cooking progress without opening the door
• Typical symptoms: light won't turn on, intermittent flicker, blackened or broken glass

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Allow the light area and lens to cool completely
• Handle halogen bulbs with a clean cloth or gloves; avoid touching the glass
• Install per your appliance's instructions and ensure the bulb is fully seated and any cover is secured

This blower and bracket assembly replaces a failed blower motor and its mounting bracket to restore airflow for proper cooling or ventilation. It reduces noise and helps prevent temperature imbalance when the original blower fails. What it does:

• Circulates air to support consistent cooling or exhaust in the appliance
• Restores airflow when a blower motor is not running or is noisy
• Helps stop excessive frost build-up or poor temperature performance caused by inadequate airflow
• Stabilizes the blower with a secure mounting bracket to reduce vibration and rattling

• Disconnect power to the appliance before starting any repair.
• Handle the blower motor carefully; avoid touching the motor shaft or fan blades with bare hands.
• Confirm mounting orientation and wiring connector match the original before final assembly.
• Use basic hand tools; refer to the appliance service manual for disassembly steps and clearances.

This lamp switch controls power to the appliance's light circuit. It turns the light on and off via the door mechanism or controls, restoring visibility inside the cavity and fixing issues like a light that won't turn on or off. What it does

• Controls the on/off function of the lamp circuit
• Activates or deactivates the light with the door or control input (as designed for the model)
• Common fix for a light that won't turn on, stays on continuously, or works intermittently
• Replaces a switch with worn, stuck, or inconsistent contacts

• 1 lamp switch

• Disconnect power before servicing; if working on a microwave, be aware of high-voltage components
• Access is typically behind the control panel or latch area; remove mounting screws/panels as needed
• Note wire positions (COM/NO/NC) and transfer one at a time to the new switch
• Verify switch orientation, secure in bracket, and test light operation before reassembly

This blower switch is the replacement control switch that operates a dryer/vent blower assembly, restoring proper fan control for venting and airflow. It provides a direct, like-for-like switch to replace a worn or failed control. What it does

• Routes power to the blower motor when the appliance calls for ventilation or cooling
• Commonly replaces switches that cause no blower operation, intermittent fan run, or no airflow from the vent
• Fits into the blower control circuit to allow normal on/off or selector functions (depends on model)
• Restores reliable blower switching after original switch fails due to wear or electrical fault

• One blower switch

• Disconnect power to the appliance before starting any service to avoid shock or injury
• Verify symptom and switch location by visually inspecting wiring and testing continuity with a multimeter
• Match mounting and connector style to the original part; transfer any mounting hardware or brackets

This installation hardware kit supplies the mounting fasteners and brackets needed to secure your appliance during new installs or replacements, helping ensure a stable, finished fit. Compatible with specified GE appliance installation points. What it does

• Provides the screws, brackets and trim fasteners required for proper appliance mounting
• Replaces missing or damaged install hardware that can prevent a secure fit
• Helps stop shifting, rocking or gaps caused by absent installation parts
• Allows completion of factory-intended mounting and trim attachment steps

• Follow the appliance installation instructions and local codes; use the kit only for its intended appliance locations
• Disconnect power and water before beginning installation
• Use correct tools and torque; avoid overtightening to prevent damage