Parts for Ge ZV950SD2SS: 01 - Range Hood Parts

The Grease Filter is an OEM part for GE range hoods. It is responsible for trapping grease and other particles from the air as it is drawn through the hood, helping to keep the kitchen environment clean and free of contaminants.  The filter measures approximately 9" x 16".

Causes of a bad grease filter can include clogging due to accumulated grease and debris, damage from cleaning or mishandling, and general wear over time that reduces its effectiveness. 

Symptoms of a bad grease filter include:

• Reduced airflow through the range hood
• Unpleasant odors lingering in the kitchen
• Grease buildup on kitchen surfaces
• Visible dirt and debris on the filter

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This pre-wired capacitor replaces the factory capacitor used to help start and stabilize appliance motors and controls. The attached lead wires make hookup straightforward for compatible appliance connections. What it does

• Provides the necessary capacitance to help motors start and run smoothly
• Helps stabilize electrical signals to reduce motor stalling or inconsistent operation
• Addresses humming, failure-to-start, or intermittent motor performance when the capacitor is faulty
• Used wherever a compact, pre-wired run/start capacitor is required by the appliance

• Disconnect power to the appliance before servicing to avoid shock or injury
• Capacitors can hold a charge; discharge safely
• Verify terminal style, polarity (if applicable), and electrical rating match the original part before installation

This is the interior/cooktop lamp bulb used in select GE microwaves. It restores proper lighting inside the cavity and/or over the cooktop so you can clearly see food while cooking and during cleanup.

• Provides illumination inside the microwave and/or for the cooktop task light
• A failed bulb can cause dim, flickering, or no light
• Helps you verify doneness and monitor cooking progress safely

• Unplug the microwave or disconnect power before service
• Allow the bulb and surrounding area to cool before handling
• Use clean, dry hands or gloves to avoid contaminating the bulb
• Replace access covers and secure fasteners before restoring power

This connection air outlet is the OEM-style duct connector that directs airflow between the appliance and its venting path, restoring proper exhaust flow and helping reduce cooking odors and moisture build-up. What it does:

• Provides a secure pathway for exhaust air from the appliance to the vent
• Restores proper ventilation when the original connector is cracked or disconnected
• Helps reduce lingering smoke, steam, and odors caused by poor airflow
• Prevents air leaks that can lead to reduced performance or heat buildup

• Turn off power to the appliance before starting any repair
• Verify correct orientation and secure all fasteners or clamps to prevent air leaks
• Inspect adjacent ducting and seals; replace damaged components for best results

This connection air outlet is the OEM-style duct connector that directs airflow between the appliance and its venting path, restoring proper exhaust flow and helping reduce cooking odors and moisture build-up. What it does:

• Provides a secure pathway for exhaust air from the appliance to the vent
• Restores proper ventilation when the original connector is cracked or disconnected
• Helps reduce lingering smoke, steam, and odors caused by poor airflow
• Prevents air leaks that can lead to reduced performance or heat buildup

• Turn off power to the appliance before starting any repair
• Verify correct orientation and secure all fasteners or clamps to prevent air leaks
• Inspect adjacent ducting and seals; replace damaged components for best results

5 A, 125 V electrical fuse that restores circuit protection when the original fuse is blown. Replacing the failed fuse helps prevent further electrical damage and can restore normal appliance operation. What it does:

• Provides overcurrent protection for the appliance circuit to stop excessive current flow.
• Replaces a blown or open fuse that prevents the appliance from powering up.
• Common symptom: appliance has no power or a circuit/component won't operate.
• Common symptom: intermittent power or a fuse that visibly shows a blown element.

• Always disconnect power (unplug or shut off breaker) before inspecting or replacing the fuse.
• Replace only with the exact rated fuse (5 A, 125 V) and part number to maintain proper protection.
• Do not bypass the fuse or use makeshift substitutes — that can cause fire or equipment damage.

The Transformer is an OEM replacement part for GE range hoods. It is an electrical component responsible for regulating voltage levels both internally and to exterior control panels. Proper voltage regulation from the transformer ensures accurate function of hood features like lighting, fan speeds, and exhaust capabilities. 

Causes of a bad transformer typically involve degradation over extended use. Faulty wiring or damage from power surges are other potential causes.

Symptoms of a bad transformer include:

• Lights flickering or not turning on as intended
• Variable or inadequate fan performance  
• Control issues such as buttons not working reliably  
• Abnormal noises from electrical components

This genuine OEM GE part is compatible with GE Monogram and select Kenmore hood brands.

This ring nut is a small threaded retaining nut that secures a mating component to its shaft or connection, restoring a stable mechanical or sealed connection and reducing movement or leaks when properly installed. What it does:

• Holds a shaft, tube or fitting in place by threading onto the mating component
• Prevents components from working loose and reduces rattling or vibration
• Helps maintain a sealed connection where used on fittings or hose connections
• Useful when a stripped or missing nut causes loose hardware or intermittent operation

• One ring nut

• Disconnect power and shut off water before beginning work
• Inspect mating threads and replace if damaged; clean threads before installing
• Hand-start threads to avoid cross-threading, then tighten with appropriate tool; avoid overtightening

Solid-state triac that switches AC power under command of the appliance's electronic control board. Replacing a failed triac restores proper power control to heating elements or motors and resolves intermittent or no-power symptoms. What it does:

• Acts as a solid-state switch on the control board to regulate AC power to heating elements or motors
• Enables the electronic control to modulate output for temperature or speed control
• Failure can cause no heat, intermittent heating, or loss of motor control
• Designed to match the original control circuit; check board mounting and connections before replacing

• Always disconnect all power at the breaker or unplug the appliance before servicing — risk of electric shock
• This part mounts to the control board; handle the board and connectors carefully to avoid damage
• Use anti-static precautions when handling electronic components;
• Verify the part number on the original board before installation